Home
Here's everything you need to know about what to put on your bars, plus beam comparisons of over 70 lights
  • The days of feeble incandescent lights are long gone. Light-emitting diodes (LEDs) have taken over as the source of bike illumination. They're robust, efficient and very cheap to run.

  • Smaller lights are plenty bright enough to get you seen at night. Need to see where you're going? Look for output of about 500 lumens and up.

  • All but the cheapest lights are rechargeable, usually via a micro-USB port so you can use a common charger or your office computer

  • Our lights comparison engine shows you the all-important differences in where the light ends up, showing that total lumens aren't the only measure of a good light.

  • Want lighting that's truly ever ready? Take a look at a dynamo system: no recharging needed and you can't leave them at home.

When the clocks go back and the nights draw in, you need to make sure you've got a set of lights on your bike. It's the law in the UK to run them after dark, and they're a major safety aid about town as well as letting you see where you're going in the dark lanes.

If you're in the market for some bike lights there's a bewildering array to choose from, at prices ranging from a few quid to nearly a grand, so what's the best bet for your riding? To help you choose here's road.cc's quick guide to the technology and the options available for your front light.

The light beam comparison engine

Our beam test comparison data contains beam shots and data for over 40 of this year's lights, so you can directly compare one with another. After it, we take a look at the various options in lighting technology and recommend some of our favourite lights. 

If you have a nice big screen you can click here for the widescreen version (1400x1000px)

About the beam comparison engine

We've collected lots of beam data so you can compare and contrast the different lights. Light manufacturers use a number of different metrics to describe light output. We've used lux here, but measured at a number of points across the width of the beam. That gives an indication of the brightness of the beam at the centre, the amount of peripheral light and the throw of the beam. We think that's the most useful measurement to directly compare. Specifically, we measured the lux value of the beam at two metres distance, in 10cm increments from the centre of the beam to 1m from the centre, giving eleven readings.

We've also included data on the shape of the beam. In previous years we've struggled to get a meaningful shape for many lights using a fixed position, so this year we've been a bit more subjective. The lights were positioned such that the shape of the beam was most noticeable, then readings taken from 0° round to 180° in 30° increments. Then the numbers were normalised for all lights, to a maximum value of 10. That gives an indication of the beam shape.

Most of the lights we tested still had a more-or-less round beam.  For riding on the road a squared-off beam has advantages. You're not wasting your battery lighting up the tree canopy, and you're less likely to dazzle oncoming traffic. Such beams are widely used in Europe, and in Germany they're the only lights legal for use on the road.

To get a good idea of what each beam looks like, we set up a bike on a rig so that we could photograph the beams of all the different lights in a comparable way. Each of the beam shots was taken using the same settings on the camera: 28mm (effective 45mm), shooting for 2s at f22 on ISO3200. If you fancy doing some of your own. So as much as they can be, they're directly comparable to one another. If one looks brighter than another, that's because it was. Skardy the Altura-Night-Vision-sporting model is at 10m (the cones are 2m apart) and the car is 20m away.

A word about logs

The graph displaying the beam data uses a logarithmic scale to display the output of the lights. If you understand or care about such things, here's why:

Firstly, light beams follow an inverse square law regarding the strength of the light at increasing distance, because they're illuminating a two-dimensional plane. So at twice the distance, the light beam is spread over four times the area. Consequently, a light that is measured as twice as bright at its centre won't let you see twice as far. The logarithmic scale produces a more realistic visual comparison because of this.

Secondly, the variations in the amount of peripheral light, though much smaller than the variations in the centre, make a big difference to how much peripheral vision you get. The logarithmic scale amplifies these differences relative to the centre of the beam, so it's easier to see which unit is putting out more light at the sides.

Light sources: It's LEDs, LEDs or LEDs these days

A few years ago you had a choice of different bulb options to consider, but LED lights have improved to such an extent – and come down in price too – that there really isn't a choice any more. LEDs tick all the boxes for a bike light. They're tiny, they cost tuppence to make, they last for ever, they're rugged, they run fairly cool and they're easy on the juice. No wonder that everyone's using them these days.

There's LEDs and there's LEDs though. The bulbs in a cheap flasher that look like the ones out of your old 100-in-1 science set are a long way removed from the high-spec emitters in top-dollar off-road lamps. Outputs have shot up in the last couple or three years as well, with the brightest lights claiming outputs of several thousand lumens, more than a car headlight. More general purpose lights range from 50 to about 500 lumens, with basic commuter lights and emergency lights weaker still; they're mostly to be seen by, though, not to see with.

Setting the standard

Technically, all bike lights must be fitted to comply with the Road Vehicle Lighting Regulations (RVLR). For the record, here's what those regs say:

Front Lamp
One is required, showing a white light, positioned centrally or offside, up to 1500mm from the ground, aligned towards and visible from the front. If capable of emitting a steady light it must be marked as conforming to BS6102/3 or an equivalent EC standard. If capable of emitting only a flashing light, it must emit at least 4 candela.

Rear Lamp
One is required, to show a red light, positioned centrally or offside, between 350mm and 1500mm from the ground, at or near the rear, aligned towards and visible from behind. If capable of emitting a steady light it must be marked as conforming to BS3648, or BS6102/3, or an equivalent EC standard. If capable of emitting only a flashing light, it must emit at least 4 candela.

You also need a rear reflector and four pedal reflectors to fully comply with the RVLR.

In practice, not all bike lights are kitemarked. The specification for lights dates back to 1986 and is designed to apply to lights with filament bulbs. That doesn't mean that LED lights can't meet the requirements – many do – but lots of them aren't specifically tested for the ageing British Standard, especially those that are for the worldwide market. Since the RVLR were amended to allow cyclists to fit flashing LEDs we've heard very little about cyclists being stopped for having non-compliant lights.

Choosing a light: things to consider

What am I going to use the light for?
Are you going to be pootling down to the shops, or do you detour through the woods on the way home? You need to consider how much light you need, and where you need it to be put. Brighter is often better, but look for lights with good side visibility if you're riding a lot in town: side visibility is very important when coming out of a junction.

If you're solely riding on the road, look for a light with a beam pattern that's not going to dazzle oncoming traffic. Narrow beams and German-style cutoff beams (designed to comply with German road lighting regulations, where 95% of the available light must be directed downwards) are the ones to look out for. If you're mixing up your road riding with paths and singletrack, a light with a wide beam that has lower-power modes for use in traffic may be the one to go for.

If you're going to be doing a lot of swapping between bikes, consider how easy that's going to be. Are the mounts quick release? Are there lots of wires to deal with?

How regularly will I use the light, and how long per day?
If your commute is an hour and your light gives out after 50 minutes then you're in trouble. If it has a proprietary charger rather than batteries or a USB charge option, then it needs to last to where you're going and back again. Think about when you'll recharge the light and how long that will take.

Many lights have low-power options that will extend battery life, so it's important to work out if these will give you enough output for certain sections of your ride. Many lights have fuel gauge displays to let you know the state of the battery, these can be very useful if you ride regularly and aren't good at remembering to charge your lights.

What conditions will I use the light in?
If you're riding every day, come what may, your lights will take a beating. They're very exposed to rain and spray at the front of your bike. Generally the more expensive lights are better constructed with more effective seals, so spend as much as you can afford. If you think you might break your lights from using them in all conditions, check what the warranty is like.

The gamut of glare

Okay, so you've got to buy some lights. What kind of lights do you need? Here's a quick run down of the basic types you can get your hands on, and who they're aimed at. We've mostly recommended lights for which we have a full review. For brand new models, take a look at the beam comparison engine, above.

Emergency lights

Radial Cycles Pharos front saftey light

Radial Cycles Pharos front saftey light

Small enough to leave in your bag for when you need them, emergency lights normally attach with a stretchy band to the bars or frame and are powered by CR2032 button cells. They don't put out a great deal of light but as an get-you-home solution if you get caught out or your main lights fail, they're a lot better than nothing.

USB-rechargeable lights have dropped in price over the last couple of years, so if you don't fancy paying for a pair of CR2032s every now and then, you can get tiny lights that'll plug into your office computer to charge.

Recommended lights

Cateye Nima — £3.99
Radial Cycles Pharos — £7.00 (read review)
Knog Frog — £6.99 (read review)
Lezyne KTV Drive — £4.99 (read review)
LifeLine Essential 17 Lumen — £6.50

Small torches

Lezyne KTV Pro front light

Lezyne KTV Pro front light

The next step up is a more powerful bar-mounted lamp. These are still lights to be seen by rather than for seeing, though most put out enough light that you can still make slow progress along unlit, well-surfaced trails and towpaths. There's almost always a flashing mode on offer too, though we'd advise discretion in its use. The pulse from even a low-power light can be bright enough to be aggravating to other cyclists, so best stick to steady mode on two-way bike paths and trails.

Of the latest batch of lights we've beam-tested only the NightRider Mako runs off separate batteries; almost all front lights in this category are now USB-rechargeable. That means the running cost is effectively zero, but it does mean that if you run out of juice you can't just nip into a service station and grab replacement AAs

Recommended lights 

Lezyne KTV Pro — £9.49 (read review)
Moon Meteor — £27.49 (read review)

Magicshine MJ-890 — £19.94 (read review)
Cateye Volt 200 XC — £33.29

Torches

moon-lx-760-high-power-usb-rechargeable-light.jpg

moon-lx-760-high-power-usb-rechargeable-light.jpg

There's lots and lots of choice when it comes to larger torch-style front lights. Powered either by either built-in rechargeable batteries or a swappable battery pack, they put out a bit more light. If your riding takes you anywhere you need to see – rather than just be seen – you'll need at least one of these.

Often manufacturers will bundle a torch-style front light with a rear flasher, seeing to both ends of your bike and scoring you a bit of a discount in the process.

Rechargeable units sometimes come with a mains adaptor but USB chargers are the majority, allowing you to juice up your light at your desk or just use another of your collection of wall-warts.

The brightest torch-style lights now kick out over 1,000 lumens, which is more than you'll ever need for road riding, but on lower settings the best ones will run all night.

Recommended lights

Lezyne Macro Drive 600XL — £42.99 (read review)
Moon LX760 — £79.19 (read review)
Light And Motion Urban 800 —£87.26 (read review)
Cateye Volt 1200 — £109.99 (read review)
Exposure Strada — £274.95 (read review)

Battery pack systems

Lumies Race front light

Lumies Race front light

The most powerful lights tend to be characterised by a separate battery pack attached to a smaller head unit that's a lot more powerful than a standard torch. They start at around £20 for a CREE-powered eBay light but you can pay the best part of a grand for the really high end stuff. The big advantage of these systems is that you can swap the battery pack if you're doing a very long ride, and some manufacturers offer a range of battery packs. If you want to go out regularly and train after dark on the lanes, or venture off-road, then a battery pack system may be your best bet.

Recommended lights

'eBay Special' Cree XML system — from £13 (read review)
Magicshine MJ-858 — £59.95 (read review)
Magicshine MJ-880 — £129.98 (read review)
Lumicycle Apex Enduro — £234.95 (read review)

Dynamo lights

Supernova E3 Pro dynamo front light.jpg

Supernova E3 Pro dynamo front light.jpg

If you want your lights to be a permanent fixture and never worry about batteries then you can't do better than a dynamo. Hub dynamos are the pick for low maintenance and decent output; most will supply 2.4-3W which is plenty for a bright light front and rear. Pick a system that stores some of the energy from the dynamo so you don't go dark when you're stopped at the traffic lights. Many riders leave their dynamo lights on for daylight running too, as they draw very little energy from the bike.

Recommended lights

Shutter Precision 8-series hub dynamo — £89.99 (Read review)
Exposure Revo Mk1 light — £179.99 (Read review)
Supernova E3 Pro 2 light — £112 (Read review)

Head torches

Lupine Neo

Lupine Neo

Fitting a light to your helmet means you can point the beam where you want it, making the light a lot more useful. Some of the smaller rechargeable systems come with a helmet mount, or you could go for a more general use headband-type light and ziptie it on. Bear in mind that you should also have a fixed light on your bike if you want to comply with the law.

Recommended lights

Lupine Neo 2 helmet light — £144.95 (read review)

Top lights deals

 

Dave is a founding father of road.cc and responsible for kicking the server when it breaks. In a previous life he was a graphic designer but he's also a three-time Mountain Bike Bog Snorkelling world champion, and remains unbeaten through the bog. Dave rides all sorts of bikes but tends to prefer metal ones. He's getting old is why.

3 comments

Avatar
Yorkshire wallet [1082 posts] 7 months ago
0 likes

I went for the £20 off ebay double CREE option. There's no shortage of light and I can't really see what extra light I'd get or even need for the high end stuff. The only downside is the battery life isn't great but I keep an extra charger at work and charged spare in the backpack just in case.

Maybe if you ride offroad or night you will see the benefits of an expensive set but for the road I'd say another lightset would be a very marginal upgrade.

Avatar
horizontal dropout [290 posts] 6 months ago
0 likes

I also bought an ebay special, double CREE for offroad. Its beam is a bit narrow for offroad but ok with a headtorch. It's really not good for road where traffic is coming towards you, (bike or car). I tested it by standing 100m in front of it with it set at different angles. Even on the lowest power I couldn't stand directly in front of it unless the main beam was pointing at the ground maybe 5 or 10 meters ahead of the bike.

I used it on some very low traffic roads and it was great but I had to nudge it to point downwards when cars were coming towards me.

I regularly use a local sustrans route and it is really very unpleasant when someone is coming towards you with a too bright beam. Not necessary for being seen and counterproductive as it blinds someone coming the other way.

So front up and get a decent German-style cutoff beam front light. They also have the benefit that all the light goes where you want it and they are very nice to ride with. Those with a Philips SafeRide 80 will know what I'm talking about.

Avatar
windyweymouth [4 posts] 6 months ago
0 likes

I'd recommend anyone needing a light to have a look at www.fasttech.com. A slection of powerful bike lights there at very resonable prices. Most will need some 18650 lithium Ion batteries.