Support road.cc

Like this site? Help us to make it better.

news

Wind turbine tubes used to rebuild collapsed bridge on World Championships road race route

Thirsk-based company supplies 2.25-metre diameter tubes to help replace bridge swept away in July floods

Wind turbine tubes are being used to replace a bridge on the route of the World Championships elite men’s road race after the original structure was swept away in last month’s floods.

North Yorkshire County Council plans to permanently rebuild the stone bridge across Cogden Beck, near Grinton Moor, but its engineers were working on finding a temporary solution to provide a link to local communities.

The fact that the race is only six weeks away now added to the urgency of the situation.

Thirsk-based Cleveland Steel & Tubes approached the council with its proposal for a solution plug the gap in the road between Grinton and Leyburn, reports The Construction Index.

As a result, two huge steel tubes, each 2.25 metres in diameter and 32 millimetres thick, have been lowered into the stream, and will help support the temporary bridge while allowing water to flow through.

The tubes had been made for a wind turbine project in Scotland that was subsequently cancelled.

The company’s managing director, Roy Fishwick, said: "We were delighted when the council accepted our proposal to deploy steel tubes to repair the bridges.”

North Yorkshire County Council’s executive member for highways, councillor Don Mackenzie, commented: “The damage caused by the unprecedented rainfall in parts of Swaledale has caused unimaginable upheaval to communities in the area. 

“We know how vital these roads and bridges are to everyday life for those living in the affected areas, so we are delighted to report we have managed to make so much progress in such a short space of time,” he added.

Latest Comments

 
Logo

Looks like your ad blocker is on.

×

We rely on ads to keep creating quality content for you to enjoy for free.

You can subscribe to road.cc to support us and turn off ads for good

Continue without supporting us

Choose your Ad Blocker

  • Adblock Plus
  • Adblock
  • Adguard
  • Ad Remover
  • Brave
  • Ghostery
  • uBlock Origin
  • uBlock
  • UltraBlock
  • Other
  1. In the extension bar, click the AdBlock Plus icon
  2. Click the large blue toggle for this website
  3. Click refresh
  1. In the extension bar, click the AdBlock icon
  2. Under "Pause on this site" click "Always"
  1. In the extension bar, click on the Adguard icon
  2. Click on the large green toggle for this website
  1. In the extension bar, click on the Ad Remover icon
  2. Click "Disable on This Website"
  1. In the extension bar, click on the orange lion icon
  2. Click the toggle on the top right, shifting from "Up" to "Down"
  1. In the extension bar, click on the Ghostery icon
  2. Click the "Anti-Tracking" shield so it says "Off"
  3. Click the "Ad-Blocking" stop sign so it says "Off"
  4. Refresh the page
  1. In the extension bar, click on the uBlock Origin icon
  2. Click on the big, blue power button
  3. Refresh the page
  1. In the extension bar, click on the uBlock icon
  2. Click on the big, blue power button
  3. Refresh the page
  1. In the extension bar, click on the UltraBlock icon
  2. Check the "Disable UltraBlock" checkbox
  1. Please disable your Ad Blocker
  2. Disable any DNS blocking tools such as AdGuardDNS or NextDNS

If the prompt is still appearing, please disable any tools or services you are using that block internet ads (e.g. DNS Servers).

Logo