Like this site? Help us to make it better.


ETC seatpost mounted QR pannier rack



If you can't fit a frame mounted rack this is the next best thing for light loads

At every product is thoroughly tested for as long as it takes to get a proper insight into how well it works. Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed are backed up by facts, reviews are by their nature an informed opinion, not a definitive verdict. We don't intentionally try to break anything (except locks) but we do try to look for weak points in any design. The overall score is not just an average of the other scores: it reflects both a product's function and value – with value determined by how a product compares with items of similar spec, quality, and price.

What the scores mean

Good scores are more common than bad, because fortunately good products are more common than bad.

  • Exceptional
  • Excellent
  • Very Good
  • Good
  • Quite good
  • Average
  • Not so good
  • Poor
  • Bad
  • Appalling

Panniers are a great way to lug stuff about, but what do you do if you can't fit a rack? This QR carrier fits in seconds to your seatpost and it's an effective way of quickly adding carrying capacity to your steed, that you can just as easily remove.

The rack is a sturdy affair, with a solid-looking central beam attaching the rack to the quick release, which comes with a couple of different diameter rubber shims that'll enable it to fit most 'posts. There's a bit of fore/aft adjustment of the rack available, and at the back you get a plate to mount your LED light to. Do the QR up nice and tight and the rack stays where it's put pretty well, even when loaded.

The rack rides about 6" higher than a standard pannier rack which can affect handling a bit, but only when it's carrying loads heavier than it's really supposed to - it's not really designed for fully loaded touring. The rack isn't as deep as a frame-mounted one, but it's deep enough that it allowed the stabilising hook to engage on all three of the panniers we tried. If your pannier uses a traditional hook right at the very bottom of the back plate, though, it won't be long enough.

The frame just about stops the panniers from falling into the wheel on cornering or over rough ground, although if your bags are big and floppy you might get a bit of contact. The top rails were fine with all the three bags we tried, each of which had a slightly different mounting system.

So what are the benefits of a QR rack over a frame mounted one? Well, obviously there's plenty of bikes that don't have mounting points. If you were doing a fast tour on your non-eyeleted road bike and wanted to carry a bit of luggage, this rack would be a good option, as it would be for an MTB expedition; you could fit your panniers to your full susser and head off into the hills with a tent in tow.

Mostly though it'll be good for commuting bikes that don't have mounting points, or there's another reason you can't fit a full-time rack: I use a child seat which interferes with a rack when it's fitted, but this QR unit means I can use my panniers when I'm not lugging kids about, without having to spend ages removing and re-fitting a standard rack.


If you can fit a frame mounted rack then that's still the best option, but there's plenty of people who can't and for them the something like the ETC QR rack is probably the best bet. At £23.99 it's a good value, well made bit of kit. test report

Make and model: ETC seatpost mounted QR pannier rack

Size tested: n/a

Rate the product for quality of construction:
Rate the product for performance:
Rate the product for durability:
Rate the product for weight, if applicable:
Rate the product for value:

Did you enjoy using the product? Yes

Would you consider buying the product? Yes

Would you recommend the product to a friend? Yes, if they couldn't fit a standard rack

Overall rating: 7/10

About the tester

Age: 36  Height: 190cm  Weight: 98kg

I usually ride: Schwinn Moab, urbanised with 700cs  My best bike is: Trek 1.5 with upgrades

I've been riding for: 10-20 years  I ride: Every day  I would class myself as: Experienced

I regularly do the following types of riding: time trialling, commuting, sportives, general fitness riding, fixed/singlespeed, mtb, Mountain Bike Bog Snorkelling, track

Dave is a founding father of, having previously worked on Cycling Plus and What Mountain Bike magazines back in the day. He also writes about e-bikes for our sister publication ebiketips. He's won three mountain bike bog snorkelling World Championships, and races at the back of the third cats.

Add new comment


DaveP | 14 years ago

Right next to the smokers shed.  2

dave atkinson | 14 years ago

nice bike shed, davep...

DaveP | 14 years ago

Great things.  1

Been using a Topeak qr MTB beam rack on my Bowery. Bit longer/wider/weightier and the side bars are optional, but the 'bend' in the beam keeps it lower on the bike.  3

Latest Comments