Like this site? Help us to make it better.

Topeak Tubi Master+



Good all-in-one tubeless repair and inflation kit, but expensive and slow to use
All-in-one design
Sturdy mount and strap
Smart valve head supports Presta and Schrader
Only three repair plugs included
Takes a long time to get ready
Plugs are hard to thread

At every product is thoroughly tested for as long as it takes to get a proper insight into how well it works. Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed are backed up by facts, reviews are by their nature an informed opinion, not a definitive verdict. We don't intentionally try to break anything (except locks) but we do try to look for weak points in any design. The overall score is not just an average of the other scores: it reflects both a product's function and value – with value determined by how a product compares with items of similar spec, quality, and price.

What the scores mean

Good scores are more common than bad, because fortunately good products are more common than bad.

  • Exceptional
  • Excellent
  • Very Good
  • Good
  • Quite good
  • Average
  • Not so good
  • Poor
  • Bad
  • Appalling

The Topeak Tubi Master+ is an all-in-one tubeless puncture repair and inflation tool. Whilst the intent and execution is mostly good, the overall experience is below that of separate components which can be purchased for far less money.

If you run tubeless tyres, when a flat happens that your sealant can't handle you need to help things out with a plug. Six years back I reviewed the now £5.99 Genuine Innovations Tubeless Repair Kit, and it's still a great option for laughably-cheap but effective tubeless repair, in a tiny and superlight package.

More recently I was very enamoured of the £24.99 Dynaplugger – a different level of beast, both for price and performance.

Both of these are plug-only solutions – you'll still need a pump or CO2 to get rolling again if you've lost too much air. There are a load of great inflators out there around the £20-25 mark, though, so you can have a kit that matches the Tubi Master+ in functionality for around £30.

The Tubi Master+ head is a nicely-machined and quality-feeling bit of kit, whereas the handle storing the three repair strips feels thin and plasticky. The included 16g CO2 cartridge is stored threaded into the head, with a 'safety lock' that prevents it screwing in fully and thereby releasing the CO2 before needed. Nice.

On the back of the head are the tools for inserting and trimming the repair strip: the 'fork' and a serrated knife, both with locks to prevent them folding up when applying pressure. On the fork is a plug retainer, a sliding ring that keeps the plug inserted whilst removing the fork.

2022 Topeak Tubi Master plus - tool 2.jpg

The tool firmly clicks into a mount, which attaches to your bike with a wide and grippy Velcro strap. This is good for a wide range of tube diameters, but if used on a smaller tube can leave a fair bit of excess strap loose with no way of tidying it. I had it fixed to various bikes and it didn't budge at all, even during long descents of seriously rocky, black-graded mountain bike trails.

2022 Topeak Tubi Master plus - on seat post.jpg

When mounted the head sticks out a bit, but it has a plug to keep crud out.

You get one 16g CO2 cartridge and three repair strips. Extra strips are available in packs of 10 for about £6, and Topeak will sell you two 16g cartridges for £9 – much cheaper alternatives are available. If you're running large tyres you can carry and use a 25g cartridge.

2022 Topeak Tubi Master plus - valve head.jpg

Due to abject good luck whilst test riding I had to replicate a flat in the home lab, stabbing into the tread area of a gravel tyre using a 4mm-wide screwdriver.

By the time I'd removed the tool from the bike, opened the handle, removed and unpeeled a strip, opened the tool, threaded it onto the fork and readied to stab the tyre, all the air had fallen out. This made the subsequent effort of pushing the large tool fork tip and strip through the tyre a right faff.

2022 Topeak Tubi Master plus - plug compartment 3.jpg

Once inserted, the little plug retainer ring does a good job of holding the strip in place whilst removing the tool. The serrated knife takes some sawing to cut through both strips – they are pretty hefty.

With the repair enacted, time for some CO2. The cartridge threads in fully once you lift the safety lock clear, and there's no loss of CO2 in the process. The head is a nice bit of work, and pressing down onto the valve the flow was controllable. Both Presta and Schrader valves are supported.

> Buyer's guide to tubeless tyres – find out all about new technology rubber

I needed a whole 16g to fill a 38mm 700C tyre to its desired 40psi. You'd want to be confident of your tubeless setup if not carrying a further cartridge or pump as backup, in case that wasn't enough due to rim/bead leakage when deflated.

2022 Topeak Tubi Master plus - plug compartment 1.jpg

My fundamental issue with the Tubi Master+ is time. Basically you're resigned to trying to stab a deflated tyre, because you're very unlikely to get everything set up before all the air's leaked out. Contrast with a Dynaplug, which is the exact opposite – if it's frame-mounted, you can have a cut stabbed within literally a few seconds of stopping.


Dynaplug does its Air Tubeless Kit for £59.99, and that includes the stabby tool, four plugs and an air hose if you want to top up later via your valve. You need to add your own CO2 cartridge, but as they can be had for a quid, you're ready to go with four super-fast repairs + air for £10 less than this Topeak option.

Or for even less, you can get the Dynaplugger plus a normal CO2 inflator for around £45.

If you're going for a standard fork-and-strip repair kit, like the £6 Genuine Innovations one (or any of loads of others), you'll have tubeless repair + CO2 for around £30 max.


It's not that Topeak has made a poor job of a solution here – it's just that separate, dedicated tools can do a better, quicker job for less money. However if you want a complete tubeless repair and inflation kit in one bundle, one that can be quickly added to or removed from a bike, the Topeak Tubi Master+ is worth a look.


Good all-in-one tubeless repair and inflation kit, but expensive and slow to use test report

Make and model: Topeak Tubi Master+

Size tested: 12x6.8x2.3cm

Tell us what the product is for and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?

Topeak says: "A compact, all-in-one tubeless tire repair kit and CO2 inflator makes quick work of repairing flats on the road or trail. CO2 inflator head fits Presta & Schrader valves and carries a single threaded 16g or 25g CO2 cartridge. Tire reamer, serrated knife and plug insertion tools fold away into tool body while a special concealed compartment holds repair plugs. A mounting module lets Tubi Master+ attach to seatposts or bike frames with included strap."

Tell us some more about the technical aspects of the product?

TOOLS CO2 inflator, 2-in-1 tire reamer / 3.5mm plug insertion tool, serrated knife / saw, plug retainer


Fits Presta / Schrader valves

TOOL MATERIAL Chrome vanadium steel

MOUNT Seatpost, bike frame, tubes

ATTACHMENT Mounting module with strap

SIZE 12 x 6.8 x 2.3 cm / 4.7in x 2.7in x 0.9in

WEIGHT 117 g / 4.13 oz

ADDED FEATURES Safety lock for CO2 cartridge, knife blade & plug insertion tool lock, repair plug compartment, mounting module with strap, dust cap, and 3 pieces of 3.5mm x 5cm tire repair plugs included

Rate the product for quality of construction:

The head and tools feel premium, the handle is a bit plasticky.

Rate the product for performance:

It's a bit of a slow, fumbling faff dealing with the fat strips and narrow fork.

Rate the product for durability:

Feels solid enough and the mount doesn't move.

Rate the product for weight (if applicable)

Reasonable for the functionality.

Rate the product for value:

Hard to see how it's great value, when a Dynaplug + CO2 can be had for less.

Tell us how the product performed overall when used for its designed purpose

Whilst it eventually does a good job, it's a slow faff to get everything ready and done.

Tell us what you particularly liked about the product

The mount and the valve head.

Tell us what you particularly disliked about the product

Threading on the strips - proper faff.

How does the price compare to that of similar products in the market, including ones recently tested on

It's definitely an expensive solution.

Did you enjoy using the product? Not really

Would you consider buying the product? Not really

Would you recommend the product to a friend? Yes, but with caveats

Use this box to explain your overall score

If you want an all-in-one solution that can be shifted easily between bikes, it's an OK choice. Otherwise it's pretty expensive for what you get, and it's slow to use.

Overall rating: 5/10

About the tester

Age: 47  Height: 183cm  Weight: 77kg

I usually ride: Sonder Camino Gravelaxe  My best bike is: Nah bro that's it

I've been riding for: Over 20 years  I ride: A few times a week  I would class myself as: Expert

I regularly do the following types of riding: cyclo cross, general fitness riding, mtb, G-R-A-V-E-L

Living in the Highlands, Mike is constantly finding innovative and usually cold/wet ways to accelerate the degradation of cycling kit. At his happiest in a warm workshop holding an anodised tool of high repute, Mike's been taking bikes apart and (mostly) putting them back together for forty years. With a day job in global IT (he's not completely sure what that means either) and having run a boutique cycle service business on the side for a decade, bikes are his escape into the practical and life-changing for his customers.

Latest Comments