The Lezyne Pressure Drive CFH is a well-made, easy-to-use and pretty well-thought-out hand pump and CO2 combo that can be used on both Schrader and Presta valves. The mount isn’t the best, though, so if you like to keep your pump on your frame it needs a little more care to make sure it stays in the right place.

In use, the pump action is decent; it does a good job for smaller top-ups or to get you home. As is the case with most mini pumps, there isn’t a pressure gauge, so you’re reliant on knowing rough pressures by feel. (If you don’t know what pressure you should be going for, check out our feature, How to choose the best bike tyre pressure.)

2025 Lezyne Pressure Drive CFH - extended.jpg
2025 Lezyne Pressure Drive CFH - extended (Image Credit: Farrelly Atkinson)

The Pressure Drive CFH comes with a detachable extension hose – the CFH part of the name (CO2 Flex Hose) – for use with the pump and the CO2 inflator. It has a reversible chuck at one end, with both Presta and Schrader fittings.

2025 Lezyne Pressure Drive CFH - hose.jpg
2025 Lezyne Pressure Drive CFH - hose (Image Credit: Farrelly Atkinson)

I recommend screwing the hose onto the valve first before attaching the pump to it, as this helps prevent twisting the valve, especially with tubeless setups. There are o-rings and seals to prevent air leaking out; you just have to make sure it’s done up tight before you start pumping.

2025 Lezyne Pressure Drive CFH - with hose.jpg
2025 Lezyne Pressure Drive CFH - with hose (Image Credit: Farrelly Atkinson)

Another thing to be aware of is that you can pull out a removable valve core if you’re not careful. This can be really annoying, especially if you don’t have a core removal tool on you, which could leave you stranded. This tends to happen when the o-ring grabs the valve core too tightly and pulls it out.

2025 Lezyne Pressure Drive CFH - hose head.jpg
2025 Lezyne Pressure Drive CFH - hose head (Image Credit: Farrelly Atkinson)

Using the pump is straightforward, and while it’s never going to be as quick and easy as using a floor pump, it does a fine job out on the roads. From flat, I got a 25mm tyre up to around 70psi in 160 strokes and about two minutes of pumping, which is pretty decent for a smaller pump.

CO2

Using the CO2 canister is easy, too. Again, I’d recommend threading the flex hose onto the valve before screwing the canister into the other end. As with most inflators, once you’ve screwed the canister onto the hose you need to unscrew it a little to actually release the gas, once the seal has been broken.

2025 Lezyne Pressure Drive CFH.jpg
2025 Lezyne Pressure Drive CFH (Image Credit: Farrelly Atkinson)

It’s more or less a one-time-use thing, but if you have a larger canister, or don’t fully empty it, you can screw it up tight to save it for another day. However, this does mean you’ll have to keep the hose attached, so it isn’t the most practical way to use it – you can’t stow it away in the pump.

The Pressure Drive CFH comes with a foam sleeve which, wrapped around the CO2 canister, does a good job of protecting your hand from the cold.

Mount

Mounting the pump and canister to your frame is a bit fiddly, and requires a little more care than most to make sure the pump stays in place. You have to put the CO2 canister in its sleeve, and then use a strap to hold the pump and canister in place; you can’t just put the pump in on its own.

2025 Lezyne Pressure Drive CFH - with frame clamp and CO2 cartridge.jpg2025 Lezyne Pressure Drive CFH - with CO2 cartridge.jpg2025 Lezyne Pressure Drive CFH - handle.jpg2025 Lezyne Pressure Drive CFH - shaft.jpg2025 Lezyne Pressure Drive CFH - extended.jpg2025 Lezyne Pressure Drive CFH - hose head.jpg2025 Lezyne Pressure Drive CFH - hose.jpg2025 Lezyne Pressure Drive CFH - with hose.jpg2025 Lezyne Pressure Drive CFH.jpg

You also have to make sure the pump is in the right way around; if you put it in the wrong way, it can fall out.

Value

At £45, the price isn’t bad for a two-in-one pump and CO2 inflator. You can easily pay £30 for a mini pump and a further £20 for an inflator, so this feels like a reasonable deal.

That said, a similar design that comes in cheaper is the Cannondale CO2 Road Mini Pump that Hollis reviewed in 2022; he thought it was decent overall, though the pump lacked power, and you only have the option of Presta valves. But it’s £32, so a £13 saving.

If you’re happy to buy separately, a classic and cheap option is the Topeak Pocket Rocket, a standard mini pump that does the job for £19.99.

Another mini pump I reviewed last year, the SKS Airflex Racer Black, is a very good option – one of the best I’ve used – but then it comes in at £38 without the CO2, so pricier than the Lezyne, and it has the same potential to pull out your valve core.

For a standalone CO2 inflator, Jamie rated Muc-Off’s CO2 Inflator Kit, which, as well as being the fun pink colourscheme that Muc-Off is synonymous with, gives you a controlled release. It does cost £29, though. 

For more options, check out our guides to the best bike pumps, the best mini pumps and the best CO2 inflators.

Conclusion

Overall, the Pressure Drive CFH is a good combo that works well. It’s decent value, and a convenient and versatile solution for on-the-go inflation needs.

Verdict

Easy-to-use combo at a decent price, but the mount could be better

All the deals displayed on our review pages are pulled from a constantly updating database feed of the best affiliate deals available. The criteria for deciding on what are the best deals is who is offering the lowest, delivered price. In most cases we will be showing the very best deal available online, but sometimes you may be able to find an item cheaper. If you can please feel free to post a link in the comments box below. To find out more about affiliate links on road.cc click here.

road.cc test report

Make and model: Lezyne Pressure Drive CFH

Size tested: One size

Tell us what the product is for and who it’s aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?

Lezyne says: “The Pressure Drive CFH’s versatile design combines the efficiency of a hand pump with the convenience of CO2 through an innovative 2-in-1 inflation system that works as both. The pump features a CNC-machined aluminum body, piston, and handle, and the Flip-Thread Chuck works on both Presta and Schrader valves. The integrated steel-braided CO2 Flex Hose (CFH) doubles as a CO2 dispenser.

“The kit includes a pump with the integrated CFH hose, one 16g cartridge with an insulated neoprene sleeve, and CFH mounting hardware. The pump’s adaptable configuration conveniently mounts to frame or slides into a jersey pocket. Compatible with threaded CO2 only.”

Tell us some more about the technical aspects of the product?

From Lezyne:

Weight: 110g

Dimensions: 190mm, 52mm, 30mm

Rate the product for quality of construction:
 
8/10

It’s a well-made pairing.

Rate the product for performance:
 
7/10

It’s a pump and CO2 combo which works well and does what you need it to, should you ever be unlucky with a roadside puncture.

Rate the product for durability:
 
7/10

No reason to think the pump won’t last well, though I’m slightly less convinced by the mount.

Rate the product for weight (if applicable)
 
6/10

It weighs more than just a mini pump, but nothing crazy.

Rate the product for comfort (if applicable)
 
7/10

The pump feels comfortable in the hand, and the sleeve to protect your fingers from a cold canister is a welcome touch.

Rate the product for value:
 
5/10

It’s not a bargain, but if you treat it as a two-in-one, then it’s not bad value.

Tell us how the product performed overall when used for its designed purpose

The pump is easy to use and the CO2 inflator does its job well.

Tell us what you particularly liked about the product

I like the combination of pump and CO2, meaning one less thing to remember.

Tell us what you particularly disliked about the product

The mount.

How does the price compare to that of similar products in the market, including ones recently tested on road.cc?

You can get cheaper pumps, but it’s a decent price for a combined pump and CO2 inflator.

Did you enjoy using the product? Yep

Would you consider buying the product? Possibly

Would you recommend the product to a friend? If they use CO2, then yeah.

Use this box to explain your overall score

It’s good: a well-made and easy to use pump and CO2 inflator. Could just do with a better mount.

Overall rating: 7/10

About the tester

Age: 25  Height: 174  Weight: 78

I usually ride: Storck Aerfast   My best bike is:

I’ve been riding for: 10-20 years  I ride: Every day  I would class myself as: Expert

I regularly do the following types of riding: road racing, commuting, touring, club rides, fixed/singlespeed, mtb,