Support road.cc

Like this site? Help us to make it better.

Back to REVIEWS
review
Brakes
Surly Braker hangerSurly Braker Hanger

Surly Braker hanger

7
by Shaun Audane
UPDATED Thu, Oct 15, 2015 04:24

First Published Dec 13, 2009

4
£7.99

VERDICT:

7
10
Elegant, well-made replacement cable guide for cross and touring bikes, perhaps a tad pricey
Weight: 
6g
Contact: 
www.ison-distribution.co.uk
How we test

At road.cc every product is thoroughly tested for as long as it takes to get a proper insight into how well it works. Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed are backed up by facts, reviews are by their nature an informed opinion, not a definitive verdict. We don't intentionally try to break anything (except locks) but we do try to look for weak points in any design. The overall score is not just an average of the other scores: it reflects both a product's function and value – with value determined by how a product compares with items of similar spec, quality, and price.

What the road.cc scores mean

Good scores are more common than bad, because fortunately good products are more common than bad.

  • Exceptional
  • Excellent
  • Very Good
  • Good
  • Quite good
  • Average
  • Not so good
  • Poor
  • Bad
  • Appalling

Complete with discrete Surly logo, the Braker is basically a stainless steel paperclip on steroids but the perfect replacement for chrome plated seat/cable hanger bolts commonly found on cyclo cross and touring bikes. It’s also a really elegant solution to the problem of running cantilevers on frames built for linear pulls. That said anyone with rudimentary metal working skills could fabricate a replica in minutes using scraps from the spares bin.

Performing the transplant on my mtb-based cross hack complete with its ugly but arguably competent cable tied reflector bracket bodge took 15 minutes, because I needed to release the inner wires. Simply extract the binder bolt and position the clip end between the ears. Replace and tighten as usual. Feed the cable into the barrel adjuster before connecting and adjusting the brakes-job done. Despite some initial concerns, there’s adequate length to accommodate most framesets (between 41 and 60cm at least) and it doesn’t seem to mind nestling between old-fashioned binder bolts or modern collars.

The barrel adjuster on our test sample felt arthritic, benefiting from a drop of oil on the threads- something I’d do as matter of course on winter/cross bikes without guards. Not only does it add the finishing touch to a classic steel frame but creeping just over 6g on the scales it will save a few grams over cheaper models/ back yard specials. Feeling really tight, I might not pop it on a hack but frankly it does the job, looks great and won’t corrode.

Verdict

Elegant, well-made replacement cable guide for cross and touring bikes

road.cc test report

Make and model: Surly Braker hanger

Size tested: n/a

Tell us what the product is for, and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?

In a nutshell, Surly's braker is an elegant stainless steel rear brake cable hanger designed primarily for cross and touring frames but could also come in handy for running a centre-pull on a winter fixed.

Tell us some more about the technical aspects of the product?

Stainless steel, 75mm long 6g

Rate the product for quality of construction:
 
7/10
Rate the product for performance:
 
7/10
Rate the product for durability:
 
7/10
Rate the product for weight, if applicable:
 
9/10
Rate the product for comfort, if applicable:
 
7/10
Rate the product for value:
 
6/10

Tell us how the product performed overall when used for its designed purpose

Surly's braker provides a lightweight elegant solution to the traditional chrome cable hanger but works particularly well marrying cantilevers to bikes built for linear pull (V brakes).

Tell us what you particularly liked about the product

Elegant and corrosion resistant.

Tell us what you particularly disliked about the product

Nothing but could be be considered overpriced by some.

Did you enjoy using the product? Yes

Would you consider buying the product? Yes

Would you recommend the product to a friend? Yes

Overall rating: 7/10

About the tester

Age: 36  Height: 1m 81  Weight: 70 kilos

I usually ride: Rough Stuff Tourer Based around 4130 Univega mtb Frameset  My best bike is: 1955 Holdsworth Road Path and several others including cross & traditional road

I've been riding for: Over 20 years  I ride: Most days  I would class myself as: Experienced

I regularly do the following types of riding: cyclo cross, commuting, touring, fixed/singlespeed, mtb,

Surly Braker hanger
Surly
cable guide
Shaun Audane

Shaun Audane is a freelance writer/product tester with over twenty-eight years riding experience, the last twelve (120,000 miles) spent putting bikes and kit through their paces for a variety of publications. Previous generations of his family worked at manufacturing's sharp end, thus Shaun can weld, has a sound understanding of frame building practice and a preference for steel or titanium framesets.
Citing Richard Ballantine and an Au pair as his earliest cycling influences, he is presently writing a cycling book with particular focus upon women, families and disabled audiences (Having been a registered care manager and coached children at Herne Hill Velodrome in earlier careers)

Add new comment

4 comments

Avatar
dave atkinson | 15 years ago
0 likes

heh. he'll die trying i'm sure 4

good point about the adjustment though. duly noted.

Avatar
amazon22 | 15 years ago
0 likes

But can he laser etch an 'S' into a stainless steel threaded barrel for less than £7.99?

Avatar
dave atkinson | 15 years ago
0 likes

you don't want to challenge shaun to anything like that. This is a man who makes his own waxoyl, for goodness' sake

Avatar
amazon22 | 15 years ago
0 likes

The point about these is that they allow you to adjust cantilver brakes and to slack them off to take the wheel out, which static hangers don't (unless the brakes are well off the rims anyway). For that reason I fitted one of these to my Van Nicholas Amazon in place of the supplied hanger, which had no adjustment - I had to source it from the USA at the time. Its very nicely made and I defy anyone to 'fabricate a replica in minutes using scraps from the spares bin'.

Latest Comments