Support road.cc

Like this site? Help us to make it better.

TECH NEWS

Does this affordable rear view bike camera with integrated light have the battery life for all-day adventures?

Now crowdfunding on Kickstarter, this bike camera with integrated 80 lumen rear light offers a huge 9.5 hours of video and audio recording time at 1080p @ 30fps

TOOO Cycling has launched a Kickstarter campaign for its bike camera with an integrated rear light. The DVR80 is a safety rear view camera for cyclists which films what’s going on behind your back when you ride. It offers a fully integrated tail light that, according to the brand, is visible to other road users from over 1 mile (1.6km) away and offers a whopping 9.5 hours of recording battery life, catering for all-day adventures. With a RRP of ~£146, it's not incredibly expensive compared to the competition either...

TOOO Cycling kickstarter mounted

> How to buy the best bike camera — plus 7 of the best

The front-facing Cycliq Fly12, for example, has a battery life of about eight hours with the camera on and the 600 lumen front light off, five hours with the light on low, and a couple of hours with the light on full power. With a claimed 9.5 hours of recording time, the DVR80 certainly seems to have an impressive battery life, especially for the quality TOOO Cycling claims it offers. 

TOOO Cycling kickstarter 3

TOOO Cycling’s 110 degree wide angle lens camera provides recording of audio and video HD1080p 30-60 fps (frames per second) footage files. The light kicks out a super bright 80 lumens on its highest setting. 

Video files are automatically protected in the event of a crash, TOOO Cycling says, thanks to its integrated technology which ensures the collection of traffic accident evidence for law enforcement and insurance decision making.

TOOO Cycling says the light sensor offers high definition footage even in very low light conditions, thanks to the quality of the SONY IMX 323 CMOS camera sensor: “Visual details will be clear, even at night in low ambient light (license plates, type of vehicle, faces can be identified)."

Image stability during rides shouldn’t be a problem either, says TOOO Cycling, thanks to the high frames per second rate, the imagery sensor and the mounting of the camera.

The camera can record at 1080p @ 60fps, which TOOO Cycling notes “is the norm for all sports cameras since it allows to almost vanish all motion blur”.

Then, TOOO Cycling says the imagery sensor determines the ability of the micro-controller to process images without any loss of quality, and at best, improve image quality from the naked-eye vision: “We use the latest version of the SONY IMX323 CMOS Image Sensor with the TOOO Cycling DVR80, which is the top-shelf image sensor available for on-board vehicle footage recording, being widely used in cars, trucks, airplanes or industrial CCTV cameras.”

Lastly, there’s how the device has been mounted. TOOO Cycling has opted for a universal bracket which allows you to mount the camera on any bike seat post diameter. “We decided to create a seat post mounting bracket for both conventional and aero seat posts since that place on any bike will be the least subject to riding vibration (since it is the closest to the balancing point of the whole bike, the radius of vibration is the smallest there)," it says. 

TOOO Cycling kickstarter 2

A two-year warranty is also included. 

£2,166 towards the £18,938 goal has been pledged so far, with 23 days to go, and the end date for the campaign is 6 January 2022. By pledging $179 (around £135), you’ll get a DVR80 camera with the full set of accessories including an iPhone/Android SD Card Reader and 64g SD card. The device is going to retail at $183 (around £146).

All the usual Kickstarter rules and regulations apply which can be found here. 

Anna has been hooked on bikes ever since her youthful beginnings at Hillingdon Cycle Circuit. As an avid road and track racer, she reached the heady heights of a ProCyclingStats profile before leaving for university. Having now completed an MA in Multimedia Journalism, she’s hoping to add some (more successful) results. Although her greatest wish is for the broader acceptance of wearing funky cycling socks over the top of leg warmers.

Add new comment

62 comments

Avatar
CitizenSmith | 1 month ago
0 likes

There seems to be no support for TOO) now - their email and website are defunct. They are inactive on Facebook. Aftter less than a year the rails on my camera have snapped - they are too brittle and too thin, meaning ti won't stay in the bracket. The claimed '2 Year Warranty' is therefore meaningless. 

 

Avatar
randonneur | 1 year ago
0 likes

I have one of these and its the best rear camera light so far.

I would like to get the same one for the front but it needs the picture upside down and a white flasher light.  The shape fits on the bike front tube quite well so no other changes are needed?

Avatar
thehill | 2 years ago
0 likes

TOOO Cycling - not sure if you are still active on this thread?

definitely tempted with one of these, cycliq flyce has died, tried replacing battery with no success.

one thing i have seen in various searches is needing to edit the settings file to set the date/time - no idea how that works - that sounds crazy - please can you try and clarify.

is there a user manual for this anywhere, that would probably provide a lot of answers

Avatar
Tom_77 replied to thehill | 2 years ago
0 likes

thehill wrote:

is there a user manual for this anywhere, that would probably provide a lot of answers

https://www.tooocycling.store/pages/user-guide-online

Looks like you do have to edit a text file to set the time. Not ideal, but I wouldn't consider it a deal breaker.

Avatar
thehill replied to Tom_77 | 2 years ago
0 likes

found the "manual" after i posted that comment.

my issue would be how frequently do you need to need to do that process to update the date/time

Avatar
randonneur replied to thehill | 1 year ago
0 likes

once, then maybe when the clocks change

Avatar
Oldfatgit replied to thehill | 2 years ago
0 likes

The original Fly6 needed a text file edit.
It was pretty simple ...
You ejected the SD card from the camera and then downloaded the file on to you computer, then changed the date in the file and saved over the original.
You then uploaded the file to the SD card and put the card back in the camera.
Change made.

(It tool longer to write this than to actually do it)

Avatar
thehill replied to Oldfatgit | 2 years ago
0 likes

i realise that this is probably one of the compromises of it being cheaper but done quite understand how frequently that process would need to be done.
if it had residual charge would it maintain date/time or do you have to do it before every ride. time moves so quickly in the morning when trying to get out of the door for the commute that having to do this before every ride would get tedious pretty quickly - that being said have a fly6 that is a brick is also tedious

Avatar
Oldfatgit replied to thehill | 2 years ago
0 likes

I only needed to do the Fly6 when the clocks changed, so twice a year.

Avatar
stonojnr replied to Oldfatgit | 2 years ago
1 like

So you ignored the drift of the internal clock time for 6months ?

Avatar
Oldfatgit replied to stonojnr | 2 years ago
0 likes

Never needed timekeeping to be accurate to the 100th of a second.

As long as it was within a 15 minute window, I really didn't care.
When you give a statement to the police with a time on, you always give an approximate time as no two clocks - unless of course they are synchronised to the global Atomic Clock - tell exactly the same time.

Avatar
wtjs replied to stonojnr | 2 years ago
0 likes

So you ignored the drift of the internal clock time for 6 months ?

It surprises me that there seems to be not much call for GPS on these cameras, even on the expensive ones. GoPro doesn't have one any more- I think my Hero 7 Black was the only one that did. If it doesn't successfully connect to GPS there's no time on the image. The immensely hopeless and unsupported-for-years GoPro PC software doesn't allow access to the 'seconds' but the 'minutes' are spot on. The internal clocks on most smartwatches and other gadgets are pretty poor if they're not connected to network time- unlike my 40 year old 'Automatic Generating System' Seiko. This has never been opened or serviced, but is now 54 seconds fast after being set at 00:00 on New Years Day. A minute a year is good going

 

Avatar
Oldfatgit replied to wtjs | 2 years ago
0 likes

Maybe it's because with these types of camera you are *typically* doing something that has another device recoding the GPS.
It annoys me that I have to download a gpx/tcx and tie that in to the video track (especially now as Cycliq are using H.265 and to use my existing telemetry overlay software I have to convert H.265 to H.264 as the software is no longer supported. Garmins software doesn't support the new versions of Chrome (needed for the maps) so GPS alignment is difficult.
However ... my 6 year old Nextbase dash cam imprints the GPS as a sidecar file contained in the video and the Next base software extracts this without the need for 3rd party software.
Cycliqs software is pants ...

Avatar
Oldfatgit replied to wtjs | 2 years ago
0 likes

Maybe the manufacturers have shaped power drain from the GPS unit for increased performance life?
Don't go-pro have a really short battery life (even without the gps)?

Avatar
wtjs replied to Oldfatgit | 1 year ago
0 likes

Don't go-pro have a really short battery life (even without the gps)?

Yes, for the purposes of most people. It doesn't much matter to me- about an hour. The main problem is the dire PC software, which frequently fails - especially after Windows updates. Mine is working at the moment, after a few days when it wouldn't start. I'm on borrowed time, living on the edge- but it's the only camera with GPS. I'm always worried about it- especially during road-rage incidents like the other night

Avatar
randonneur replied to thehill | 1 year ago
0 likes

I just make sure its charged up, turn it on and go.  

Avatar
randonneur replied to thehill | 1 year ago
0 likes

You just edit a text file changing a zero to a 1 , the files are available when you plug into a pc.

Avatar
Janoree | 2 years ago
0 likes

Glad I found this thread, I've been waiting for an update on the gen2 rear camera from Paul at ChilliTech for months. Is paying through Kickstarter the only way to get one of the DVR80 cameras? I'm not sure what assurances or warranty I would get, I suspect none? I'm keen to buy but don't want a piece of kit that is useless in a months time and no come back. Thanks. 

Avatar
TOOO Cycling replied to Janoree | 2 years ago
0 likes

Can you let me know which country you are from? Please rest assured that we will no longer sell our products through Chilli Tech, we will be responsible for our own brand, and we will provide warranty services for the products. If you need more information, you can visit our public homepage: https://www.facebook.com/TOOO-Cycling-105347488077019

Avatar
Sriracha | 3 years ago
0 likes
Quote:

TOOO Cycling says the light sensor offers high definition footage even in very low light conditions, thanks to the quality of the SONY IMX 323 CMOS camera sensor: “Visual details will be clear, even at night in low ambient light (license plates, type of vehicle, faces can be identified)."

whereas the Kickstarter page says,
"NIGHT SENSOR : Designed for use at night in a dimly lit environment thanks to the SONY Sensor® IMX 307 CMOS"

323, 307 - what's the difference (no maths jokes pls) and does it matter?

Avatar
TOOO Cycling replied to Sriracha | 3 years ago
0 likes

Compared with 323, 307 has a number of parameters leading, especially with better night performance. Because it has a larger area of ​​the photosensitive element.

Avatar
TOOO Cycling replied to Sriracha | 3 years ago
0 likes

In the new generation of products, we used 307. There is a huge improvement in video quality.

Avatar
Sriracha replied to TOOO Cycling | 3 years ago
0 likes

So the report here on road.cc is wrong/out-of-date?

Just a little confused that you are quoted on this site extolling the benefits of the sensor (323) fitted to your latest kickstarter project, and then the kickstarter site itself says something different (307).

Is this just an editorial error here at road.cc, have you been misquoted in the article, or what?

Avatar
wtjs | 3 years ago
0 likes

I am impressed by the company (boss?) coming on here. Looking forward to UK footage.

Avatar
TOOO Cycling replied to wtjs | 3 years ago
2 likes

Haha,yes!I'm here.yes

In the CYCLIQ group, a customer in the UK uploaded a video and made a comparison. But I cannot download the video and show it here. I will try to get the video from the client and show it here with his permission. If you happen to be in the CYCLIQ group, you may be able to see what customers share.

Avatar
wtjs replied to TOOO Cycling | 3 years ago
0 likes

Thanks. I use a helmet GoPro Hero 7 Black. The GoPro PC software is the problem, but the hardware is good. I'm keen on your camera, but it's the vibration I'm worried about- roads here are wrecked.

Avatar
TOOO Cycling replied to wtjs | 3 years ago
1 like

To be honest, DVR80 is a good product as a dash cam. I believe that on bumpy roads, the license plate of the car behind you will be clearly recorded,Especially at night, we have significantly better performance than similar products. But if we discuss sports cameras, I think GOPRO will win. The positioning of these two products is different.

But I still hope to be able to upload the video of cycling in the UK as soon as possible, because I have confidence in the quality of the video.

Avatar
wtjs | 3 years ago
4 likes

This looks good- on the well-lit 21st century roads of wherever-it-is in South Asia- however, I need to see how it works in the Third World: the cart track roads of North Lancashire. I hope someone who gets one posts some footage of use on authentic UK roads!

Avatar
OnTheRopes replied to wtjs | 3 years ago
2 likes

Well, I hope to be out with mine tomorrow, happy to post some footage if I have set it up correctly, not sure how I post it on here though. I'll  not be out in the dark though.

Avatar
Steeksma | 3 years ago
0 likes

I have been using the Chilli rear cam since first available. Happy with video quality and light.

The mount is useless. The retaining tab broke off on both mounts on second use. Camera bounces well....

Good cam/light let down by the mount. Hopefully this is addressed in Mk2  1

Pages

Latest Comments