The Pro Stealth 3D Performance Saddle features 3D printed padding for greater comfort on long rides. It favours those who ride in a more aero position, and the large nose encourages a more active riding style. The downside is a weight penalty over the standard model and it’s also quite expensive – though less so than similar 3D-printed saddles.

This Pro saddle is Shimano’s foray into the world of 3D printing. It’s based on the Pro Stealth and shares many similarities – the main one being it’s designed for a more aggressive riding position.

While that version was reasonably lightweight, the 3D version on test here gains a little in pursuit of greater comfort across a variety of riding positions.

Available in either 142mm or 152mm widths, there’s no really narrow option for smaller folk unfortunately.

Different budgets are, thankfully, given consideration. The ‘Performance’ version I’m testing (in 142mm width) gets stainless steel rails and comes in at £230, or you can get carbon rails with the ‘Team’ version for £289. Both have a carbon-reinforced base and the same 3D-printed padding.

While this is far from cheap, it’s a mid-tier offering in either guise.

2026-Pro-Stealth-3D-Performance-Saddle-2.jpg
2026-Pro-Stealth-3D-Performance-Saddle-2.jpg (Image Credit: Farrelly Atkinson)

Pro’s Stealth 3D saddle, like many of its other saddles, is also compatible with a variety of accessories, thanks to two small bolts at the rear of the underside. This means you can securely fit a camera bracket, saddle bag and more.

In the 142mm width, the Performance version weighs a claimed 260g, though it came in at 252g on the road.cc scales of truth. As you would expect, the carbon rail Team version is a bit lighter at a claimed 224g in the same width. Whichever you go for, neither are what could be considered lightweight.

2026-Pro-Stealth-3D-Performance-Saddle-from-rear-2.jpg
2026-Pro-Stealth-3D-Performance-Saddle-from-rear-2.jpg (Image Credit: Farrelly Atkinson)

Pro is clearly not chasing the weight-weenie end of the market though. The 3D padding is substantial to the point where it looks almost OTT – more so due to its short profile and super stubby nose. It definitely takes some getting used to, especially when you’re used to the slender lines of something like a Selle Italia SLR saddle.

Again, this aesthetic is intentional. Pro has designed this thing to be comfy as heck, which after eight months under my butt I can absolutely confirm. In fact, it’s the comfiest saddle I’ve ever tested.

This is a product of Pro’s research into pressure mapping, which found that, “riders utilise different parts of the saddle at different times,” and that riders prefer, “different densities to provide more comfort in each position.”

The result is a saddle with three distinct mesh zones, with a firmer front third, a softer middle, and a soft rear.

2026-Pro-Stealth-3D-Performance-Saddle-nose-detail.jpg
2026-Pro-Stealth-3D-Performance-Saddle-nose-detail.jpg (Image Credit: Farrelly Atkinson)

The idea is that the front allows you to get into an aggressive aero position where it’s not so much about being comfortable, since you’re probably only doing it for a short period, but you want to feel supported.

This is further aided by the width of the nose, which allows you to sit on it in relative comfort. Clearly, if you have bike fit issues where your bike is too long, you might use this as a place to perch yourself all day, but that is most definitely not what it’s there for.

2026-Pro-Stealth-3D-Performance-Saddle-rear.jpg
2026-Pro-Stealth-3D-Performance-Saddle-rear.jpg (Image Credit: Farrelly Atkinson)

The middle section is soft enough that you don’t get undue pressure on your sit bones but without feeling like you’re sinking in. Unlike other 3D-printed saddles where you sit directly on the 3D-printed lattice, the Pro Stealth features a dimpled outer section, so it just feels like sitting on a normal saddle – albeit a more comfortable one.

The saddle features Pro’s signature triple bridge cutout, and the company says the padding is also more effective at absorbing road buzz. The shape of the saddle itself is fairly neutral, though

2026-Pro-Stealth-3D-Performance-Saddle-rear-detail.jpg
2026-Pro-Stealth-3D-Performance-Saddle-rear-detail.jpg (Image Credit: Farrelly Atkinson)

I tested the Stealth 3D on both short and long rides, on road and on some chunky gravel. Comfort levels are seriously high, making even the roughest of rides a total delight.

Despite this high level of cushioning, there’s loads of support, and you feel like you’re on a saddle that’s designed for riding aggressively, rather than wafting along.

Value

With a price of either £230 or £280, depending on which version you go for, the Pro Stealth 3D sits in the mid-range of 3D-printed saddles – though it’s slightly more affordable than many others out there.

2026-Pro-Stealth-3D-Performance-Saddle-from-rear.jpg
2026-Pro-Stealth-3D-Performance-Saddle-from-rear.jpg (Image Credit: Farrelly Atkinson)

The Specialized Power Pro with Mirror is virtually the same weight as the Performance version of the Pro Stealth 3D, but is £45 more expensive, as is the recently tested EVO version which is supposed to be better suited to a wider variety of riding positions.

Slightly lighter, at around 224g, is the Fizik Vento Argo Adaptive R3 saddle – though again it’s pricier at £260.

The regular Pro Stealth Performance is about 50g lighter than the 3D version, and is a more palatable £144.99.

> Choose the right saddle for you and your riding — our top picks for every type of cyclist

Conclusion

If comfort is your primary concern, then Pro’s Stealth 3D should go straight to the top of the list and it’s also a relatively good price against similarly-specced 3D-printed saddles.

Weight weenies need not apply, however. If you’re looking for a much lighter 3D-printed saddle then you’ll have to pay a lot more.

Test Report

What does the manufacturer say about this product?:

Pressure mapping tests show that riders utilize different parts of the saddle at different times, and test rider feedback shows that they prefer different densities to provide more comfort in each position. That is why the PRO Stealth 3D Performance Saddle has 3D-printed padding to better suit your needs.

Getting the right saddle for you is essential to help you enjoy your riding and perform at your best. The PRO Stealth 3D Performance Saddle features a carbon-reinforced base, set on stainless steel rails, and 3D-printed padding. Pressure mapping during bike fitments and test rider feedback helped the PRO product development team create a saddle with a firmer front third, a less-firm middle, and a soft rear.

The dense padding on the nose of the PRO Stealth 3D Performance Saddle ensures comfort when you are bent forward in an aggressive aerodynamic position. This, along with the broad anatomic fit cut-out, removes pressure from your soft tissue between your sit bones. The lower density mid-section is designed to spread the load effectively across your sit bones, preventing hot spots. The low-density honeycomb padding at the rear of the saddle helps reduce the overall saddle weight. The 3D-printed padding is also more effective than traditional EVA padding at absorbing road buzz, while the dimpled texture helps lock you in place on the saddle during all-out efforts.

The PRO Stealth 3D Performance Saddle is available in 142- and 152-millimetre widths, and the narrower version weighs 260 grams.

Tell us some more about the technical aspects of this product:

3D-Printed Padding
3 Mesh Zones Located with Pressure Mapping Data
PRO’s Most Comfortable Stealth Saddle
Lightweight and Stiff Carbon Reinforced Base
Dimpled Outer
Triple Bridge Design Anatomic Fit Cut-Out
Road Buzz Dampening
Compatible with all PRO Saddle Accessories

Rate the product overall for quality (1-10):
9/10
Rate the product for performance when used for its designed purpose (1-10):
9/10
Rate the product for value (1-10):
7/10

How does the price compare to that of similar products in the market, including ones recently tested?:

Pricier than both the Specialized Power Pro with Mirror and Fizik Argo Adaptive R3 – two similar spec 3D-printed saddles. The regular version of the Pro Stealth is £90 cheaper than the 3D-printed model

Did you enjoy using the product? Yes

Would you consider buying the product?

I’d probably go for the carbon rail version to compensate for the weight

Would you recommend the product to a friend? Yes

Use this box to explain your overall score

A 3D-printed saddle is always going to be a bit of an investment over a regular one, but in this case it feels worth the additional 3D-printed tax. It’s supremely comfortable, works in a range of riding positions, and honestly feels like a worthwhile upgrade for any bike

Overall rating: 8/10

About the tester

Age: Height: cmWeight: 175kg

I usually ride: Condor Italia RC custom buildMy best bike is:

I’ve been riding for: 10-20 yearsI ride: A few times a weekI would class myself as: Experienced

I regularly do the following types of riding: Commuting, Touring, Club riding, Sportives, Mountain bike XC, Mountain bike Enduro, Mountain bike downhill/freeride,