Support road.cc

Like this site? Help us to make it better.

forum
road.cc bike forum

Campag Zonda shimano freehub replacement

by rob39
Wed, Jun 19, 2019 17:47
1

So my freehub has gave up and seems a straight forward job in replacing it. Only question is & basic but is there a specific shimano hub needed to replace it or can a generic one less expensive available

If you're new please join in and if you have questions pop them below and the forum regulars will answer as best we can.

Add new comment

1 comments

Avatar
Welsh boy | 5 years ago
2 likes

I’m sorry to say that you will have to get one designed for your hub, cheap ones for other makes won’t fit. However, I wouldn’t mind betting that it is the outside sealed bearing which has died (speaking from experience). Try tapping the bearing out with a small hammer and screwdriver and see how it feels, it is a readily available bearing which costs about £5. Carefully tap the new bearing back in but don’t forget the spacer or you will have to strip it back down. 

Latest Comments

 
Logo

Looks like your ad blocker is on.

×

We rely on ads to keep creating quality content for you to enjoy for free.

You can subscribe to road.cc to support us and turn off ads for good

Continue without supporting us

Choose your Ad Blocker

  • Adblock Plus
  • Adblock
  • Adguard
  • Ad Remover
  • Brave
  • Ghostery
  • uBlock Origin
  • uBlock
  • UltraBlock
  • Other
  1. In the extension bar, click the AdBlock Plus icon
  2. Click the large blue toggle for this website
  3. Click refresh
  1. In the extension bar, click the AdBlock icon
  2. Under "Pause on this site" click "Always"
  1. In the extension bar, click on the Adguard icon
  2. Click on the large green toggle for this website
  1. In the extension bar, click on the Ad Remover icon
  2. Click "Disable on This Website"
  1. In the extension bar, click on the orange lion icon
  2. Click the toggle on the top right, shifting from "Up" to "Down"
  1. In the extension bar, click on the Ghostery icon
  2. Click the "Anti-Tracking" shield so it says "Off"
  3. Click the "Ad-Blocking" stop sign so it says "Off"
  4. Refresh the page
  1. In the extension bar, click on the uBlock Origin icon
  2. Click on the big, blue power button
  3. Refresh the page
  1. In the extension bar, click on the uBlock icon
  2. Click on the big, blue power button
  3. Refresh the page
  1. In the extension bar, click on the UltraBlock icon
  2. Check the "Disable UltraBlock" checkbox
  1. Please disable your Ad Blocker
  2. Disable any DNS blocking tools such as AdGuardDNS or NextDNS

If the prompt is still appearing, please disable any tools or services you are using that block internet ads (e.g. DNS Servers).

Logo