Support road.cc

Like this site? Help us to make it better.

Back to REVIEWS
review
Cameras
RaceWare Direct Go Pro bar mount

RaceWare Direct Go Pro bar mount

7
by dave atkinson
UPDATED Thu, Oct 15, 2015 04:24

First Published Oct 1, 2013

2
£29.99

VERDICT:

7
10
Well-made camera mount that will hold your GoPro with no problems.
Weight: 
14g
Contact: 
www.racewaredirect.co.uk
How we test

At road.cc every product is thoroughly tested for as long as it takes to get a proper insight into how well it works. Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed are backed up by facts, reviews are by their nature an informed opinion, not a definitive verdict. We don't intentionally try to break anything (except locks) but we do try to look for weak points in any design. The overall score is not just an average of the other scores: it reflects both a product's function and value – with value determined by how a product compares with items of similar spec, quality, and price.

What the road.cc scores mean

Good scores are more common than bad, because fortunately good products are more common than bad.

  • Exceptional
  • Excellent
  • Very Good
  • Good
  • Quite good
  • Average
  • Not so good
  • Poor
  • Bad
  • Appalling

Raceware Direct's GoPro mount is a simple and effective way to stick a camera on your bars. It's simple and it works very well.

Raceware's kit is mostly 3D printed from nylon and comes in a range of colours. This GoPro mount will accept any camera that uses the same mounting standard as the market leader; that includes Muvi's bigger cameras, and Nilox units. The mount is little more than a nylon loop for the bars that tightens with an Allen bolt (there's a brass insert in the nylon for it to tighten against) and the three-pronged camera mount that you attach to the waterproof housing with a thumb bolt.

Once everything's in place (it was a snug fit against an oversize bar) it holds the camera very solidly. The nylon grips the bars very well so there's no need for a shim, and similarly it's possible to tighten the camera mount so that it doesn't slip. I found hanging the camera below the bars meant it was less likely to slip and also was less intrusive; most cameras allow you to flip the sensor for upside-down mounting.

No complaints, really. Except that £30 is a lot of money for a plastic loop, even if it has been lovingly printed in the UK. Although it's ten quid more than GoPro's own handlebar mount, it's a lot less bulky and fiddly to fit, so worth the extra.

Verdict

Well-made camera mount that will hold your GoPro with no problems.

If you're thinking of buying this product using a cashback deal why not use the road.cc Top Cashback page and get some top cashback while helping to support your favourite independent cycling website

road.cc test report

Make and model: RaceWare Direct Go Pro bar mount

Size tested: n/a

Tell us what the product is for, and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?

This is 3D printed Nylon mount to hold your gopro camera secure on your bars, it is designed to fit 31.8mm bars. This mount is available in a variety of colours and comes complete with the required bolts to install the camera. The clamp opens up enough to allow easy installation to the bars without having to remove bar tape, shifters etc. Standard postage is £3.50 for worldwide shipping.

Rate the product for quality of construction:
 
8/10
Rate the product for performance:
 
9/10
Rate the product for durability:
 
8/10
Rate the product for weight, if applicable:
 
8/10
Rate the product for value:
 
6/10

Tell us how the product performed overall when used for its designed purpose

Very well.

Tell us what you particularly liked about the product

Easy to fit, holds the camera securely.

Tell us what you particularly disliked about the product

A bit spendy.

Did you enjoy using the product? Yes.

Would you consider buying the product? Yes.

Would you recommend the product to a friend? Yes.

Overall rating: 7/10

About the tester

Age: 40  Height: 190cm  Weight: 102kg

I usually ride: whatever I'm testing...  My best bike is: Genesis Equilibrium with SRAM Apex

I've been riding for: 10-20 years  I ride: Every day  I would class myself as: Experienced

I regularly do the following types of riding: commuting, sportives, general fitness riding, fixed/singlespeed, mtb, Mountain Bike Bog Snorkelling, track

 

RaceWare Direct Go Pro bar mount
mount
go pro
Dave Atkinson

Dave is a founding father of road.cc, having previously worked on Cycling Plus and What Mountain Bike magazines back in the day. He also writes about e-bikes for our sister publication ebiketips. He's won three mountain bike bog snorkelling World Championships, and races at the back of the third cats.

Latest Comments