Support road.cc

Like this site? Help us to make it better.

feature

Peter Sagan’s Specialized S-Works Roubaix - But will he ride mechanical?

Sagan has been spotted riding both his Shimano Di2 bike and a mechanical Dura-Ace setup in his Paris-Roubaix recon rides

Paris-Roubaix is, many will say, the best race of the year for a bike tech nerd. For years it has been the place for big tyres, special bikes, old-skool wheels and generally strange setup choices. Peter Sagan will take to the start line on the Specialized S-Works Roubaix, but his exact setup is seemingly yet to be decided. Here are the tech details of his two options.

The return of mechanical?

Hands up who can remember the last time a big men’s race was won on mechanical shifting? I can’t. The big teams in the men’s peloton are all on electronic shifting these days, so it is nice to see mechanical shifting make an appearance every now and again.

Peter Sagan S-Works Roubaix (Credit Specialized)-3

CyclingTips noticed that Sagan was out doing the standard pre-Roubaix citing ride and it was here that they spotted him on the mechanical Shimano Dura-Ace R9120 groupset. There are a few reasons why the three-time World Champion might be looking to use mechanical shifting on Sunday and the main one is simply that cobblestones are really bumpy.

> Review: Specialized S-Works Roubaix

Peter Sagan S-Works Roubaix (Credit Specialized)-2

The shift paddles on the R9120 shifters are larger, a little more pronounced and there is less chance of an accidental shift if your finger is hovering on the paddle. We’ve seen Fabian Cancellara make the same switch to mechanical in the earlier days of Di2 for just this reason.

That said, one benefit to electronic shifting systems is the ability to mount satellite shift switches on various parts of the handlebar. Should you be a fan of riding the cobbles with your hands on the tops, a set of shifters can be glued to where the bar tape stops next to the stem and that should make shifting while riding the cobbles a bit easier.

One race too far for clinchers?

Peter Sagan S-Works Roubaix (Credit Specialized)-4

Despite some wacky frame designs, the best way to make a bike more comfortable for the cobbles of the Hell of the North has long been to install wider tyres and run them at lower pressures.

Roval, the brand which provides wheels to Sagan’s Bora-Hansgrohe team, released its latest wheelsets in tube-type clincher versions only. There was no provision for tubeless and certainly no tubular option.

While this is evidently fine for most races - Asgreen won Flanders and Allaphilippe took the Worlds on clinchers - Paris-Roubaix is a different beast entirely.

While we’ve seen a huge number of tubeless tyres in the recon ride photos, Sagan seems to be heading back to his trusty Roval CLX 50 tubular disc wheels.

On these is mounted what looks to be the Specialized Hell of the North Turbo Cotton tubular tyres. These tyres were designed specifically for this race and feature a tread that extends 4mm further down the sidewall on each side. There is also extra puncture protection hiding under the Gripton compound. Sagan has raced on the 30mm size in previous editions so we’d expect him to be on that size again this year.

Front end bouncer

Peter Sagan S-Works Roubaix (Credit CyclingImages)-3
CyclingImages

The Specialized Roubaix features the Future Shock 2.0 which is a hydraulic damper that adds 20mm of travel to the front end. The idea is that this helps to isolate the rider from the roughness of the cobbles, but there is also a dial located on the top cap, allowing the rider to tune the damping that the system provides.

And the rest

Peter Sagan S-Works Roubaix (Credit Specialized)-1

Sticking with the front end of the bike, Sagan selects a carbon Pro Vibe handlebar with a round top section. The stem looks to be the model from the Tarmac SL7, so it is presumably one that Sagan likes. What we know for certain is that it’s a long stem.

Peter Sagan S-Works Roubaix (Credit CyclingImages)-7

CyclingImages

The saddle is a Specialized Romin Evo, though it isn’t the top-end S-Works model. Maybe to add weight to the bike to bring it up to the UCI’s 6.8kg minimum weight, or perhaps for the Ti saddle rails, Sagan uses the Evo Expert Gel model.

Peter Sagan S-Works Roubaix (Credit CyclingImages)-5

CyclingImages

Gearing looks to be a 53/44 chainset with an 11-28 cassette. The larger inner ring is used in Paris-Roubaix has there are no real hills and the larger inner ring is more useful for getting moving again should a rider have to stop on a section of cobbles.

Sagan opts for Shimano’s top-end disc rotors and picks a 160mm for the front with a smaller 140mm at the rear.

> 11 ways the pros prepare for Paris-Roubaix + see what it's like to ride the Arenberg

Add new comment

5 comments

Avatar
Rapha Nadal | 2 years ago
0 likes

"there is also a dial located on the top cap, allowing the rider to tune the damping that the system provides".

It's on or off.

Avatar
TheBillder replied to Rapha Nadal | 2 years ago
1 like
Rapha Nadal wrote:

"there is also a dial located on the top cap, allowing the rider to tune the damping that the system provides".

It's on or off.

That's the digital world...

Avatar
Secret_squirrel | 2 years ago
0 likes

Where does the 44t inner ring come from?  Not one of the official Shimano sizes is it?  A google suggests only Rotor make them.

Avatar
Rendel Harris replied to Secret_squirrel | 2 years ago
1 like

Pro issue only but they do make them - very occasionally see Dura Ace 56/44 sets for sale on secondhand forums.

Avatar
Glov Zaroff | 2 years ago
0 likes

"Hands up who can remember the last time a big men’s race was won on mechanical shifting? I can’t. "

If you mean a P-R win then it was Cancellara 2013 on Shimano Dura-Ace BR-9000.

Latest Comments