The Candy X is about the cheapest Crank Brothers pedal you can buy: they're £45 RRP but you can have them for a lot less than that online. Our test pair have put up with plenty of abuse despite only being resin-bodied, but watch out for the cleat bolts and take good care of the bearings.
At the heart of all the Candy range is Crank Brothers' 4-sided Eggbeater pedal, but with a small platform added to aid stability which effectively makes them 2- rather than 4-sided. The Eggbeater mechanism is free to rotate within the body and engaging the cleat is normally fuss-free. Once you're in you have either 15 or 20 degrees of float, depending on which way round you fit the cleat. That's more than most systems so if you suffer from knee problems they're worth considering for that.
You're not held as tightly as a road cleat, or even an SPD, but although the contact can feel a little vague at times I never once pulled the cleat out of the mechanism when yanking on the pedal. You have to twist your ankle quite a long way to disengage, which is worth remembering the first time you roll up to the lights...
Be careful when fitting the cleats, as the bolts are pretty low quality and it's easy to round them off even with a good Allen key. You'll need to pay close attention to the bearings too, they're fine when they're adjusted properly but they can work loose over time. they're pretty easy to service - there's one bushing and one cartridge - and taking the spindle out gives you an opportunity to slap some grease in there. If you do break the Candys, they're warrantied for 2 years.
Weighing in at just 270g they're certainly light, and with the exception of the cleat bolts they're decent quality for the money. They work as a road pedal and they're good off-road too, so if you just one one platform for all your bikes it's one to consider. It's fair to say the feel of the Eggbeater pedal divides opinion somewhat, so I'd give them a go on a friend's bike if you can before jumping in.
Decent budget pedals for mixed use, watch out for the cleat bolts though
road.cc test report
Make and model: Crankbrothers Candy 1 pedal
Size tested: Black
Tell us some more about the technical aspects of the product?
spindle forged scm435 chromoly steel
body one piece composite
wings stamped steel
spring 300 series stainless steel
inner bearing bushing
outer bearing cartridge
cleat premium brass cleat
release angle 15' to 20'
warranty 2 years
Point off for the cleat bolts, other than that they're not bad for the money
cleat bolts and resin cage aren't that sturdy, but they're fine for road use
They're not cheap at RRP but you can get 'em for less online
Tell us how the product performed overall when used for its designed purpose
Pretty well, the Eggbeater platform isn't my favourite but it does the job just fine
Tell us what you particularly liked about the product
Light weight, lots of float
Tell us what you particularly disliked about the product
Clipped-in feel a bit vague, cleat bolts are a bit shoddy
Did you enjoy using the product? Mostly
Would you consider buying the product? Maybe
Would you recommend the product to a friend? Maybe
About the tester
I usually ride: whatever I'm testing... My best bike is: Genesis Equilibrium with SRAM Apex
I've been riding for: 10-20 years I ride: Every day I would class myself as: Experienced
I regularly do the following types of riding: time trialling, cyclo cross, commuting, sportives, general fitness riding, fixed/singlespeed, mtb, Mountain Bike Bog Snorkelling, track