Genuine Innovations Campione track pump  £69.99

6/10

Looks good but there are better performers for much less money

Weight 1420g   Contact  www.zyro.co.uk

by VecchioJo   September 13, 2010  

Find a store

The Campione track pump from Genuine Innovations certainly looks smart, a stylish maroon and cream with a ‘premium’ wood handle and brass fixings that sashays it out of the workshop and places it artfully next to the Eames Chair in the warehouse conversion.

The main body of the pump is steel while the foot is aluminium, the toes of which have a rubber covering which feels nice under socked soles pumping tyres up when between slippers and Sidis.

The hose is good and long, enough to reach a valve at the top of a wheel in a workstand bike and when not in use loops round the handle and held in place with a couple of jaws on the top of the body and a clip on the hose itself.

The brass valve connector is clamped on the end of the hose with a little jubilee-clip, old-school, but as it doesn’t have any lock-on device it relies totally on the interference fit between the rubber inside the head and the valve to seal, sometimes this can slip a bit sideways to leak air or blow off completely (ooooh, matron!), the aged-mechanic technique of one hand holding the head on while the other hand pumps the handle needs to be employed at times, it fits in with the retro feel I guess. The supplied brass Schrader adaptor thankfully screws onto the valve for security and is simply pushed tight into the end of the pump-head in use, but as there’s no chain or securing leash on the adaptor you’ll probably loose it the moment you take it out to use the pump on a Presta valve. We did. You'll find it under the fridge. The little rubber grommet around the connector has perished already and fallen off somewhere on the kitchen floor. It’s probably what caused the cat to be sick that time.

The pressure gauge sits on the foot of the pump and though Genuine Innovations say it’s large it isn’t really, and it’s a mess of lines and numbers making it hard to decipher from nearly six feet up, especially if trying to read the bar pressure written in teeny blue numbers. Luckily there’s a rotating bezel around the gauge with a red arrow on it to align to the required pressure, it’s not ideal to be honest. The dial says the pump can reach the heady pressure of 260 PSI, we know that we, and the vast majority of track-pump users, aren’t ever going to need to get to that pressure unless we take up track racing on tubs, but it’s nice to know, like the 160 MPH at the end of the car's speedo. The furthest we’ve ever pushed it is into the 120s which the Campione managed without either it or us breaking a sweat.

In spite of its minor faults its actually quite an efficient pump, the base is sturdy and it feels solid with only a bit of flex in the handle shaft, getting things up to pressure quickly and easily. But the harshest test for this pump is that for its entire working life its lived in the corner next to the existing track-pump that has a locking dual-valve head, an easily read pressure-gauge at the top of its body and is about half the cost; it’s not half as pretty though. This is the pump that was used in preference to the Genuine Innovations model every time. It’s not that there’s anything desperately wrong with the Campione, it’s just that there’s better out there, for less. And if I wanted a retro looking pump I’d probably go for a model that actually has history, such as a Silca or SKS, rather than a pastiche such as this.

Verdict

It's a shame that the Campione's performance doesn't quite live up to its good looks and brassy details, it's not a bad pump but it needs to have the niggly details sorted for this price. If you want a pump that looks good because your workshop is in the front room then this is the pump for you, if you just want a pump that works just as well or better but costs less then there's plenty out there to choose from.

road.cc test report

Make and model: Genuine Innovations Campione track pump

Size tested: n/a

Tell us what the product is for, and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?

“Max Pressure is 260psi, Custom premium wooden handle. Custom 2-Tone cream and maroon painted steel barrel and custom aluminum matching base. Lower mounted large gauge for easier reading. Heavy duty brass Presta ready head with Schrader valve Adapter.”

Genuine Innovations are supplying the basic facts there, apart from the easy to read gauge bit. We'd like a locking head and a less fussy dial added to that please.

Tell us some more about the technical aspects of the product?

A sturdy steel body with aluminium feet all painted in a deep red and cream to match your retro steel steed. Or a municipal bus. A dark wooden handle, a long hose with brass fixings and the potential to reach scary pressures.

Rate the product for quality of construction:
 
8/10
Rate the product for performance:
 
7/10
Rate the product for durability:
 
7/10
Rate the product for weight, if applicable:
 
7/10
Rate the product for comfort, if applicable:
 
8/10
Rate the product for value:
 
4/10

Tell us how the product performed overall when used for its designed purpose

It performed ok, it's a perfectly good track-pump, the lack of a lock-on head is a minor annoyance, and the messy floor-hugging gauge isn't good for your eyes.

Tell us what you particularly liked about the product

It looks nice and the brass gubbins are a touch of style and quality.

Tell us what you particularly disliked about the product

The price, the need to sometimes hold the hose onto the valve, the time spent wondering where we put the Schrader adapter.

Did you enjoy using the product? On the whole, yes, it gave me a warm fuzzy glow of nostalgia. And the maid enjoyed polishing the brass bits.

Would you consider buying the product? No, too pricey.

Would you recommend the product to a friend? If it matched their workshop colourway or their Mercian, yes.

Overall rating: 6/10

About the tester

Age: 42  Height: 180cm  Weight: 73kg

I usually ride: It varies as to the season.  My best bike is: The one I\'m on at the time

I've been riding for: Over 20 years  I ride: Most days  I would class myself as: Experienced

I regularly do the following types of riding: road racing, cyclo cross, general fitness riding, fixed/singlespeed, mtb, Fun

2 user comments

Oldest firstNewest firstBest rated

"the existing track-pump that has a locking dual-valve head, an easily read pressure-gauge at the top of it’s body and is about half the cost"

So 'fess up, what's the existing track-pump?

posted by horizontal dropout [148 posts]
13th September 2010 - 21:48

like this
Like (26)

the existing track pump is a Topeak Joe Blow Sprint that was reviewed on this site a while back but seems to have fallen off the internet now, it's the big brother of the Topeak Joe Blow Sport that's a bit cheaper but also gets a great review

posted by VecchioJo [744 posts]
14th September 2010 - 23:32

like this
Like (30)

road.cc reviews

Latest reviews

8/10
£14.99
August 20, 2014
9/10
£2999.00
August 20, 2014
6/10
£21.99
August 19, 2014
8/10
£329.99
August 18, 2014
7/10
£44.99
August 18, 2014
6/10
£7.99
August 17, 2014
8/10
£2899.00
August 17, 2014
9/10
£15.99
August 16, 2014
8/10
£117.00
August 16, 2014
7/10
£35.00
August 15, 2014
2/10
£9.99
August 15, 2014
8/10
£49.99
August 14, 2014
8/10
£180.00
August 13, 2014
8/10
£599.99
August 12, 2014
7/10
£12.99
August 11, 2014
8/10
£1595.00
August 10, 2014
6/10
£8.99
August 9, 2014
8/10
£39.99
August 7, 2014
7/10
£19.99
August 7, 2014
3/10
£9.99
August 6, 2014
9/10
£30.00
August 5, 2014
8/10
£259.99
August 5, 2014
7/10
£73.00
August 4, 2014
8/10
£499.99
August 3, 2014
7/10
£69.99
August 3, 2014
8/10
£29.99
August 2, 2014
 
1