Home
Verdict: 
Impressive build quality and dazzling output but clothing clip needs revising and run time could be better
Weight: 
35g
Contact: 
www.2pure.co.uk Tel:0844 811 2001
NiteRider Cherry Bomb Rear LED
8 10

LED lights have developed at a blistering pace to the point where even half a watt’s output is becoming commonplace.

The aptly named Cherry Bomb features two retina burning modes and incorporates a collimator, (basically a lens which projects the light in a specific direction).

In the case of the Cherry Bomb it spreads the light giving much better peripheral visibility which should help make negoating roundabouts and emerging from junctions less dicey.

The other unique feature is the integral reflector, reacting to car headlamps even when the LED is off which could prove a lifesaver in the event of sudden battery failure. On the subject of batteries, burn times seem quite modest from two AAA cells. We got 18 hours on constant and 36 hours in flashing mode: with the Cherry Bombs you are trading run time for brightness. It's not nearly as bright but the Cateye rear light we reviewed recently will give more than three times as much run time. Mind you, If your commute takes you out beyond the street lights you may consider the trade off of run time for extra brightness is one worth making.

There are only two modes, constant and flashing. I'd prefer more flashing modes – although there are others on the road.cc team who would argue that two modes is all you need. Whichever mode you chose though, I can well believe you’d be visible from up to a mile away.

Build quality is impressive, substantial weather seals sandwiched between the robust casings mean you can forgo the time honoured slither of Vaseline on the battery contacts. Distributors 2Pure tell us they kept one in a bucket of water and then froze it into a block of ice and it still kept going. So I popped it in a bucket of water for the night and, yep, it was still going strong in the morning.

The small-rubberised switch is very tactile and sensibly positioned to avoid accidental triggering in the bottom of a bag although feels remote operated in gloved hands. Similarly, the main, post mounted bracket appears suitably sturdy-even over rough surfaces. The clothing clip is adequate attached to the jersey pockets of a training jacket but is a bit too hit and miss on courier bags and/or webbed strapping.

Claimed run time: 20/40 hours

Shaun Audane is a freelance writer/product tester with over twenty-eight years riding experience, the last twelve (120,000 miles) spent putting bikes and kit through their paces for a variety of publications. Previous generations of his family worked at manufacturing's sharp end, thus Shaun can weld, has a sound understanding of frame building practice and a preference for steel or titanium framesets.
Citing Richard Ballantine and an Au pair as his earliest cycling influences, he is presently writing a cycling book with particular focus upon women, families and disabled audiences (Having been a registered care manager and coached children at Herne Hill Velodrome in earlier careers)

9 comments

Avatar
DaveP [412 posts] 7 years ago
0 likes

What's the mounting like for attachment to a bike??

Avatar
cactuscat [284 posts] 7 years ago
0 likes

"the main, post mounted bracket appears suitably sturdy-even over rough surfaces"

or did you mean what's it actually physically like?

Avatar
DaveP [412 posts] 7 years ago
0 likes

Some use rubber bands and others use screws and clamps... How quick/is it to remove?

( NR stuff tends to be pretty good )

Avatar
ourmaninthenorth [81 posts] 7 years ago
0 likes

I have an increasing desire to light myself up like a Christmas tree, and an additional, bright rear light looks like a good start (I already use a Cateye LD1100 and a small helmet mounted LED from Tesco).

Avatar
Tony Farrelly [2869 posts] 7 years ago
0 likes

 and he says:

"It's a plastic and rubber shim seat-post mount affair secured with a philips head screw and takes about a minute to fit/remove."

Avatar
DaveP [412 posts] 7 years ago
0 likes
tony_farrelly wrote:

 and he says:

"It's a plastic and rubber shim seat-post mount affair secured with a philips head screw and takes about a minute to fit/remove."

QR for the lamp?

Avatar
dave atkinson [6251 posts] 7 years ago
0 likes

 the lamp slots in and out, it has a clip on the back

Avatar
DaveP [412 posts] 7 years ago
0 likes

That'll be one on my next shopping list then!
 1

Avatar
limpyweta [1 post] 6 years ago
0 likes

Did yall get 18 hours of light from the complete discharge of a set of alkaline batteries? Did the same procedure go with the blinking test? What kind of batteries where used? I only ask because I am trying to determine how long I should have my cheap, uncontrolled NiMH charger plugged in for and I'm too lazy to conduct a test myself without getting rear-ended in traffic. Unlike alkalines, NiMH batteries lose juice fast at a certain point of discharge.