OneUp Components’ Aluminium Wheelset is as simple as its namesake. But that’s no bad thing, especially in this case, as the brand has developed a durable and high-quality wheelset that delivers comfort and stiffness in equal measure. Its tape job could have been a little better, however.
OneUp Components Aluminium Wheelset – Technical details
After spotting the brand release its own hubs last year, it was safe to say that a wheelset was incoming, and the Aluminium Wheelset is every bit as OneUp as you would expect. The brand states that this wheelset is built for trail and enduro riders.
Available in 29-inch or mixed sizes (29-inch front, 27.5-inch rear), the wheelset uses Boost hub spacing, and there’s a 30mm internal width on both wheels.

Additionally, these wheels have been built with front and rear-specific designs in both the rims and the spoke count. The front rim is built using less material, which, along with 28 Sapim double-butted J-bend spokes, promotes more compliance. The rear rim then uses more material and 32 spokes for a boost in durability. Those spokes are threaded into aluminium nipples set in 3mm offset spoke drillings in the rim.
Approved for e-bike use and rated to ASTM 4, the Aluminium Wheelset comes with an XD freehub driver as standard, and with a set of OneUp-branded Fillmore valves. Note that Microspline and HG drivers are to be bought separately, and OneUp offers them at half price (£22) with the purchase of a wheelset.

And although the OneUp hubs come in a range of colours, only black freehubs are available here, and the rims are not available as a separate purchase.
These wheels come sorted with a two-year warranty to the original owner that covers hub issues, visibly cracked rims, rims that don’t hold air, damaged spoke holes, and particularly bad flat spots.
OneUp Components Aluminium Wheelset – Performance
As the adage goes, the best things are those you forget about, and that’s very much been the case with OneUp’s Aluminium wheelset because throughout my time with them, they’ve pretty much been faultless.

I say pretty much because it hasn’t been the picture of perfection. Unfortunately, after installing tyres, sealant leaked from the nipples for a while. Thankfully, it has sealed, and I didn’t lose too much air pressure during this brief time.
However, installing tyres on this wheelset has been breezy. I’ve run both Maxxis’s DHX with the New DH casing and Cast’s Protagonist/Antagonist duo, and both inflated without issue. It’s then great to see a set of OneUp-branded Fillmore valves included in the box. These are a must-have upgrade, in my opinion, because they make tubeless installation noticeably easier, but with these wheels, you’re not having to shell out extra. Nice touch, OneUp.

These wheels use a front and rear-specific design, which has become increasingly common, but for the Aluminium Wheelset, it’s a formula that works well. At the rear, there are 32 spokes to promote strength, which makes sense as it’s the wheel you’re most likely to mangle through choppy terrain. The front then uses 24 spokes to bring a bit of compliance and comfort into the mix.
The result is exactly what OneUp describes – a ‘responsive ride feel that strikes the balance of compliance and strength’. The balance of stiffness and compliance that the brand has managed to achieve is pretty spot on. From the front wheel, at least, there have been no harsh vibrations transmitted to the alloy handlebar I’ve been running over the past few months. However, when cornering hard, the front wheel is stiff enough to feel direct, without a hint of twang. Generally, the front wheel is comfortable but without losing front-end certainty.

Towards the rear, there’s definitely a heightened sense of stiffness. Now, I have been running a 650b rear wheel, so that sense is somewhat natural, but pushing this wheel hard into turns, sliding over roots into banks, and charging through root-infested terrain all guns blazing has all come naturally to OneUp’s Aluminium Wheelset.
The freehub is well sorted, too. It’s hasty in its engagement, and during my time with the wheels, it’s remained totally consistent on the durability front. In fact, the wheelset as a whole is still looking pretty primo after months of riding through the summer. Granted, there’s the odd scratch after a stray rock has struck the rear wheel, but that’s to be expected, and scratches haven’t occurred as easily as they have with wheels from other brands.

Generally, this wheelset is as hassle-free as it gets. Both wheels are still spinning as true as they did out of the box, and the bearings are still rolling smoothly. It’s also a useful plus that the freehub can be removed without tools, making maintenance and general cleaning super easy. That said, I’ve not yet felt the need, and the freehub’s internals are still looking mighty tidy.
OneUp Components Aluminium Wheelset – Verdict
At £550 a set, the OneUp Components Aluminium Wheelset is a little pricier than Hunt’s Enduro V3, another great pair of hoops. However, for that £50 extra, you’re getting a lighter wheelset that’s less prone to scratching. Plus, the Hunt freehub requires extra tools for removal.
Spend another £100 and then you’re looking at something like Reserve’s 30HD Aluminium wheels. These can be built with DT Swiss’s Degrees of Freedom tech for that cash, which is definitely a benefit, and they come with Fillmore Valves. But if you’re not fussed about the Degrees of Freedom kit, OneUp’s offering is certainly more attractive.
DT Swiss’s M 1900 wheelset comes in at £449.98 and is compatible with the Degrees of Freedom tech. It claims to be only a little heavier than the OneUp wheelset, but they use straight pull spokes, which aren’t as readily available.
OneUp Components has achieved excellent things with its Aluminium Wheelset. The brand has managed to balance compliance, strength, and weight in a package that’s pretty much fit and forget. However, it would be great to see non-XD freehubs included in the price, and a little more care in applying the rim tape.
Test Report
What does the manufacturer say about this product?:
“A durable and dependable wheelset for trail and enduro riders, laced to proven OneUp Hubs. Our wheels are designed to deliver a responsive ride feel that strikes the right balance of compliance and strength.”
Tell us some more about the technical aspects of this product:
29″ or MX Wheelsets
Boost Spacing
30mm internal rim width
Black OneUp Hubs
Weight (including XDr driver): 1996g (29”), 1951g (27.5”)
Sapim, double-butted spokes with aluminum nipples
OneUp Fillmore Valves
XDr Driver Included with every wheelset (MS and HG Drivers are available for purchase separately)
28h front wheel, 32h rear
3mm Offset Spoke Drillings
Front- and rear-specific rim design
E-bike approved – ASTM 4 rated
Any further comments on performance?:
Rim tape job could be better
How does the price compare to that of similar products in the market, including ones recently tested?:
Pricier than Hunt Enduro V3 and DT Swiss M 1900, but more affordable than Reserve 30HD.
Any further comments on weight?:
Not bad for an aluminium wheelset.
Any issues with durability?:
No
Did the wheels stay true? Any issues with spoke tension?:
Yes
How were the wheels in windy conditions?:
N/A
How easy did you find it to fit tyres? If you used them tubeless, how easy were they to seal?:
Very.
How did any wheel extras (if supplied) perform?:
Fillmore valves are amongst the best
Did you enjoy using the product? Yes
Would you consider buying the product? Yes
Would you recommend the product to a friend? Yes
Use this box to explain your overall score
The OneUp Components Aluminium Wheelset is a great set of wheels that you can genuinely forget. They’re comfortable, durable and have a great touch of stiffness about them.
About the tester
Age: 34
I usually ride: Santa Cruz Bronson
I’ve been riding for: 10-20 yearsI ride: A few times a weekI would class myself as: Experienced
I regularly do the following types of riding: Mountain bike Enduro



