3T's Arx II Pro stem is – you'll not be surprised to know – an evolution of its Arx Pro stem. It's nicely made, stiff, and available in a good range of sizes. The odd choice of steerer clamp bolt is the only real issue.
The Arx II Pro uses a standard alloy shaft and a similar faceplate to the previous design, with the cutout 3T logo, but the shape has been refined a bit and the look is a little more sculpted.
Find your nearest dealer here
Buy this online here
Torx T25 bolts take the place of 4mm Allen bolts in the faceplate, and at the steerer you get a single bolt instead of two. It's an M7 thread with a Torx T30 head: precisely no one will be carrying one out on your ride, so make sure it's done up before you go. In a pinch you can do it up with a 4mm Allen key but it's an odd choice of bolt and it means you'll need to take a specific tool if you travel with your bike, which is a bit of a pain.

We had a 130mm, +/- 6 degree stem. The Arx II Pro is available in 10mm increments from 70mm to 130mm, and there's a +/- 17 degree rise version too. You can run it either way, just flip the faceplate so the logo isn't upside down.
Once fitted the stem did all the things stems do, like holding the bar and turning the steerer, without any kind of fuss or complaint. It's nice and stiff and there's no discernible twisting when you haul on the bar: an alloy tube is hard to beat for resisting torsional flex, after all. All the bolts are good quality and a few wet outings haven't resulted in any rust spots.

At 159g for the 130mm (claimed 135g for 110mm, which seems about right) it's not the lightest out there, but given that you can pick this stem up for about £30 online and you're only adding about 40g over even the very lightest stems that cost many times as much, it seems like a sensible place to spend your money. Even at full retail it would be a decent buy.
Verdict
Good quality stem available in a decent range of sizes and angles
All the deals displayed on our review pages are pulled from a constantly updating database feed of the best affiliate deals available. The criteria for deciding on what are the best deals is who is offering the lowest, delivered price. In most cases we will be showing the very best deal available online, but sometimes you may be able to find an item cheaper. If you can please feel free to post a link in the comments box below. To find out more about affiliate links on road.cc click here.
road.cc test report
Make and model: 3T Arx II Pro Stem
Size tested: +/-6°, 130mm
Tell us what the product is for, and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?
3T says: "Arx II is an evolution of the well-liked Arx alloy stem, which has found a place on every sort of bicycle since its launch in 2007. It's a subtle refresh of this classic design. The faceplate is drawn in tighter at top and bottom, for a more ovalized frontal appearance, while retaining the cutout 3T logo. The sides of the extension are slightly flattened for a more sculpted look by comparison with the tubular section of the first-generation Arx. A single M7 bolt clamps the stem to the fork steerer, in place of the twin M5 bolts used previously. Bolts are now the more-secure Torx-type fitment in place of the Allen bolts used previously."
Tell us some more about the technical aspects of the product?
Weight: 135g (110mm)
Length: 70, 80, 90, 100, 110, 120, 130mm
Steerer: 1-1/8in
Material: AL 2010
Angle: +/-6°, +/-17°
Bolts: Torx T25
Finish: Shot Peened/Black Anodized
Stack: 40mm
Certification: CEN
Very nicely made and finished.
Discharges its duties well. Big bolt is a faff.
Not much to go wrong here.
You can go lighter but it's not heavy.
Good value.
Tell us how the product performed overall when used for its designed purpose
Very well.
Tell us what you particularly liked about the product
Nice and stiff, well made.
Tell us what you particularly disliked about the product
Faffy big Torx bolt to tighten onto the steerer.
Did you enjoy using the product? Yes. Except that bolt.
Would you consider buying the product? Yes
Would you recommend the product to a friend? Yes
Use this box to explain your score
A good quality, reasonably light stem for not too much cash. The odd choice of stem bolt marks it down a point.
About the tester
Age: 42 Height: 189cm Weight: 92kg
I usually ride: whatever I'm testing… My best bike is: Kinesis Tripster ATR, Kinesis Aithein
I've been riding for: Over 20 years I ride: Every day I would class myself as: Experienced
I regularly do the following types of riding: road racing, commuting, club rides, sportives, general fitness riding, fixed/singlespeed, mountain biking, Mountain Bike Bog Snorkelling, track






8 thoughts on “3T Arx II Pro Stem”
What were they thinking?! How
What were they thinking?! How many common torque wrenches even have torx bits?
Yemble wrote:What were they
Mine’s pretty basic and it came with a T25 head
I agree, T25 and T30 bolts
I agree, T25 and T30 bolts seem increasingly common on bikes these days, it’s pretty stupid to put them on parts unnecessarily like this.
I like to have the tools to adjust my bike on the road, for example in the case of this stem, a crash could easily put the bars/stem out of whack and I’d rather not just yank them back into place if I had a carbon bars/steerer.
I’m not going to carry around extra tools just for this eventuality, especially when I could easily go and buy a different stem. Seems like a dumb move from 3T to me.
Alternatively, if you like
Alternatively, if you like the stem otherwise, you could, y’know, replace the bolt.
In any case, as the review says, a hex key will do for a roadside bodge.
I wish every manufacturer
I wish every manufacturer would just go to torx bolts. They are so much better – far less likely to round-off/stripout.
I got one of these for a new
I got one of these for a new bike build having had the old Arx on two other bikes.
And then I had to go out and buy some torx keys.
A decent stem (like the old one) and the hex key bodge works fine at the roadside
Would never touch one of
Would never touch one of these – had bolts break on two Arx stems. (I use a torque wrench and tighten in a “z” pattern religiously.)
Don’t understand objection to torx bolts. Not sure I see them as a massive improvement but most multi tools (and torque wrenches) come with a T25 and T30 bit. And you’ll need them when you switch to disc brakes….
surly_by_name wrote:
Don’t
i don’t have any particular objection to torx bolts, but most multi tools certainly don’t come with a T30. T25 is fairly common because it’s the disc rotor standard.
I’ve never had a multi tool with a T30 on, ever.
Comments are closed.