Home
Verdict: 
A nicely made tool, very slim but also pretty pricey, and check your spoke key needs...
Weight: 
112g

The Vel Slim 17 multi-tool measures just 10mm at its thickest point, and at just over 4 x 7cm, it disappears into pretty much any space within a seatpack, pocket or toolroll. At £35 it's not cheap, but the tools provided, CNC machining and little pouch add up to a quality buy – IF your spokes suit the size of spoke keys on offer.

  • Pros: Very, very slim; pretty much every tool you're likely to need, especially if you run certain Shimano wheels
  • Cons: Price, odd choice of spoke wrench sizes... unless you run certain Shimano wheels

The Vel Slim 17 hails from Cooke Components, a Hampshire-based distributor that develops the Vel range of cycling accessories and parts in-house. The attention to detail and finish on the Vel 17 tool is a good reflection of its effort to deliver high-quality gear.

> Find your nearest dealer here

The Vel 17 covers pretty much every base for a long day ride: all the hex keys including an 8mm add-on for pedals, four spoke keys including a Mavic M7 star-shaped, and a bottle opener for that late-afternoon bevvy. There's a T25 for your brake mounts, but no T30 for chainring bolts, but they should be nice and tight before you set off, shouldn't they?

Aside from the usual tools that work perfectly well, the chain tool is actually good enough to not only remove a dead link, but re-install a Shimano pin – no mean feat given the precision needed.

With the chain tool completely unscrewed it makes for a workable spoke key, albeit one with a very odd choice of 4.3, 4.4 and 4.6mm square-faced spoke sizes, along with a Mavic M7 hex-star one. This baffling choice means that if your wheels have 3.3, 3.4 or 3.96mm nipples then you're out of luck. That'll be all my wheels, then. I have fixed hundreds of bikes over the last five years, and have yet to require a 4.3, 4.4 or 4.6mm spoke key. Maybe Shimano wheels that use 4.4mm nipples at the hub don't go out of true, or my customers just can't afford the spec they get built onto... Regardless, it's a decidedly weird choice to miss out completely the common-as-muck sub-4mm sizes most bikes in the world use.

> Buyer's Guide: 11 of the best multi-tools

The provided faux-leather pouch is good at keeping sharp edges away from tubes inside your seatbag, tool roll or pocket, and holds the tool firmly while being easily extracted with gloves on.

You may find the stubby keys and drivers struggle to access areas such as bottle cage mounts, but that's common across all tools of this sort of design.

vel_slim_17.jpg

Neil really liked the Fabric 16 tool and all that the Vel 17 adds (it's in the name, folks) is a small crosshead screwdriver that is small enough to do the covers on shift lever pods. That said, the larger one is perfect for derailleur limit screws, as is the flat screwdriver blade if needed. The Fabric 16 is also, for me, 4/16ths more useful than the Vel 17, with the Fabric's four spoke keys being of common sizes.

Unless you rock Shimano wheels in the aforementioned spoke sizes, for £10 less the Fabric 16 is, for my money, the better option here.

Verdict

A nicely made tool, very slim but also pretty pricey, and check your spoke key needs...

If you're thinking of buying this product using a cashback deal why not use the road.cc Top Cashback page and get some top cashback while helping to support your favourite independent cycling website

road.cc test report

Make and model: Vel Slim 17 Multi-tool

Size tested: One

Tell us what the product is for and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?

It's for people wanting the backup of a little toolkit in their pocket, who run certain Shimano wheels...

Vel says: "17 Function super slim multi-tool with storage pouch. Fits easily in your jersey pocket or even the smallest saddle pack."

Tell us some more about the technical aspects of the product?

Key Features:

2 / 2.5 / 3 / 4 / 5 / 6 / 8mm Hex Keys

2 x Cross head screwdriver

Flat head screwdriver

T25 Torx

Multi spoke wrench (Shimano 4.3 / 4.4 / 4.6 + Mavic M7)

Bottle Opener

Chain Tool (9/10/11 speed)

Storage pouch

CNC finished

Rate the product for quality of construction:
 
9/10

Very nicely done. Feels premium.

Rate the product for performance:
 
8/10

For a tool that small, it works a treat.

Rate the product for durability:
 
8/10

CNC'd and alloy, it hasn't rusted or worn over a few months.

Rate the product for weight (if applicable)
 
8/10

Not bad at all. It needs some strength, so is always going to weigh something.

Rate the product for value:
 
4/10

There are cheaper, if slightly thicker, options (with more universally useful size spoke keys).

Tell us how the product performed overall when used for its designed purpose

Well indeed – but I didn't need to true a wheel or remove a spoke.

Tell us what you particularly liked about the product

The slimness. It's soooo slim.

Tell us what you particularly disliked about the product

The spoke keys. Weird choices.

Did you enjoy using the product? Yes

Would you consider buying the product? No

Would you recommend the product to a friend? Only if they rocked Shimano wheels of that spoke key size.

Use this box to explain your overall score

It's a hefty premium Vel is asking here, for a multi-tool that includes four rather obscure spoke key sizes. If you have those sizes, great – because it's a really nice tool – but it ain't cheap.

Overall rating: 6/10

About the tester

Age: 45  Height: 183cm  Weight: 72kg

I usually ride: Merida Ride 5000 Disc  My best bike is: Velocite Selene

I've been riding for: Over 20 years  I ride: A few times a week  I would class myself as: Expert

I regularly do the following types of riding: cyclo-cross, club rides, general fitness riding, mountain biking, Dutch bike pootling.

5 comments

Avatar
vonhelmet [1350 posts] 8 months ago
0 likes

I do wonder how much use an 8mm wrench can be on a multi tool. For one thing, what the hell has happened mid-ride if you need to adjust your pedals? For another, you’re going to need arms like Thor to get enough force through a 7cm tool to turn a pedal bolt, and the tool may well disintegrate in the process.

Avatar
TheHungryGhost [66 posts] 7 months ago
0 likes

I ride an old steel framed bike with a square taper bottom bracket.  On a recent ride, the cheap crank arm kept coming loose, the 8mm Allen wrench was very useful for tightening it back up to keep me going - had to do this a few times as the arm had rounded off a bit.

Replaced the arm with a an old Record one I had kicking around, but hadn't fitted in the first place as I didn't have the 7mm wrench required.

Avatar
ktache [1560 posts] 7 months ago
0 likes

I purchased a Park tool IB2 pretty much for the 8mm hex thingy, the smaller hexs and the torx helped too, just to tighten the 8mm hex on my xtr cranks, but I put the thingy on the standard 6mm from my cool tool and attached the cool tool because I wanted better leverage.  I of course had tried to get a 6-8mm hex converter, but they don't seem to be that available.

Avatar
vonhelmet [1350 posts] 7 months ago
0 likes

Crankarm bolts makes more sense, I guess.

Avatar
Simon E [3732 posts] 7 months ago
0 likes

I have to wonder whether 17 bits isn't a bit OTT. I've just bought the Topeak Mini 9 for £7, which has the most useful ones for me (no Torx on any of my bikes). I am sure I don't need a bottle opener and I'm yet to be convinced that the chain tools & spoke keys on these things are up to the job.