Shimano 105 R7000 groupset

Shimano 105 is the privateer standard. That's the basic premise of this review: if you read no further, then know that you're getting a groupset that's so close in look and functionality to Dura Ace and – especially – Ultegra that's it's very hard to justify the extra spend. If it was my money, this is the mechanical groupset I would buy for racing and fast riding. The return for going higher is a very slight weight reduction, and looks that are a bit more shiny. Really that's about it: the Shimano 105 groupset is so good now that the gaps in performance have all but disappeared.

Pros: Near flawless performance, great value, good looks

Cons: Nothing really

Let's take a look at the parts in turn

Chainset

The 105 chainset is now a direct descendant of the Dura Ace chainset. It uses a very similar construction for the spider; Shimano have been using their Hollowtech process for a long time and they've stuck with it in spite of their rivals moving to carbon. The process results in a hollow crank arm; the new crank design is wider but the weight overall is reduced. The outer chainring is heavily machined on the inside face to reduce weight, like the previous version, but retains splines across the machined section to make sure stiffness isn't compromised. It's not quite as technically advanced as the Dura Ace and Ultegra outer rings, which feature a two-piece construction, but you wouldn't know unless you looked at it from the back. The design is a bit more susceptible to storing grime in all the recesses but that's not a huge issue.

> Buy Shimano 105 R7000 groupset

> Find a Shimano dealer

Stiffness is right up there with the best. Shimano are persisting with a 24mm steel axle, where others have moved to 30mm aluminium axles, but it doesn't appear to make any meaningful difference to the performance of the crankset. This is a super-stiff unit: jump on the pedals and give it the beans and there's barely any movement of the rings at the front derailleur, so you hardly ever get any mech rub when things are set up properly.

Shifting between the two rings is excellent, with the new front mech (more on that below) making front shifts light and predictable; the front shifting is probably the biggest difference between this groupset and its predecessor. I moved directly from one to the other, stripping a Shimano 105-5800 groupset off my race bike to fit this new kit, and there is a noticeable difference between the two in the lightness of the shifting at the front.

Dual control levers

Shimano doesn't currently have any plans to trickle Di2 down to 105 level, so if you're after electronic shifting then you'll need to go up to Ultegra. The new Shimano 105 levers are redesigned, and it'll not be a surprise to know that they're taking on some of the changes made further up the groupset hierarchy. The shifting mechanisms have been tweaked to make the shift a bit more snappy, and the shape of the lever has been changed: it's slightly more compact and squarer, and features a patterned rubber cover for extra grip on the hoods. Personally I find the new shape very comfortable and I found the old shape very comfortable too, so it hasn't really improved things in that regard, but they are a bit more grippy in the wet which is a bonus, and they maybe look a bit more purposeful.

You don't get the carbon brake lever that you have on Ultegra and Dura Ace, so the levers are a bit heavier as a result. These are the mechanical levers: there's also a new hydraulic lever for use with hydraulic disc brakes, which replaces the current, slightly clunky, RS505 unit. We have those in for testing too but we'll report on them separately.

Read more: Your complete guide to Shimano groupsets

The operation of the levers will be familiar to anyone that's ever used a Shimano Dual Control system: both levers towards the middle to shift up, just the inner lever to shift back down. It generally works faultlessly, and these levers are no exception. Shifts up and down the cassette, and from one chainring to the other, are very efficient and predictable. You can shift up to three gears up the cassette at once; downshifts are one at a time. The throw of the lever has been shortened slightly from the 5800 lever, which makes shifts from the drops a bit easier. The reach adjustment range has been increased too, which will be happy reading for those with smaller hands.

The 105-7000 levers have one foible, which is replicated right across the Shimano Dual control universe: if you accidentally catch the brake lever when you want to downshift then the mechanism doesn't engage and you'll need to try again. It's not the end of the world by any stretch of the imagination, but it is an issue to be aware of, and one I often find myself wishing they'd address. Normally it's gloves that trigger it; in the summer it's rarely a problem.

Rear derailleur

The rear derailleur is completely new for 105, moving over to Shimano's Shadow technology that's come over to the road from the mountain bike groupsets. The mechanism is significantly more compact than the previous mech, meaning that the derailleur doesn't protrude so far outside the frame (33mm, as opposed to 45mm). This means it's better protected in the event of a crash. The new derailleur is available in two cage lengths; the shorter SS mech is for cassettes up to 11-30T, and the GS has a claimed maximum of 11-34T (although in reality it'll handle a lot more). The new design is compatible with direct mount frames, although there aren't many of those in the road sector right now.

Shimano tried a new barrel adjuster design for the Ultegra 8000 groupset, and it wasn't very well received. The 105-7000 mechs have a standard Shimano barrel adjuster that works just fine. Setting up the mech is pretty easy, although the position of the pinch bolt makes it a bit awkward to cinch. Once you're there, though, shifting is everything you'd expect: precise and repeatable across the whole cassette. I've used both the SS derailleur on an 11-28 cassette and the GS derailleur on an 11-34, and there's no meaningful difference in performance between the two: shifts are crisp and light. The higher spring tension of the new mechs means that there's a lot less chain movement overall; Shimano don't offer a clutch mech like they do with Ultegra (the RX derailleur) but unless you're running a single ring setup that's not really a concern. I found that the stronger spring and the new design makes it marginally harder to drop out the rear wheel, but I think it's mostly that a slightly different technique is needed.

Front derailleur

Again, the front derailleur is fundamentally redesigned. The new front mech uses a cam arrangement to actuate the shift, and that allows the unit to be much more compact. The issue with the previous mech was the long pull arm that in some cases could clash with a larger tyre. That's not an issue with the new version, and it has other benefits too. You can run an outer cable all the way to the mech which is useful for some bikes with tricky internal cable runs. The new cable clamp also features a tension adjustment screw, which means you can dispense with an inline barrel adjuster. As before there's a polymer insert on the back of the cage which cuts right down on noise if there's any cage rub at the extremities, so the mech is a bit more forgiving of setup being slightly off.

The shift is improved. It's not a seismic change, but the front shifts are a bit lighter and more predictable than with the previous groupset. That's down to the combination of shifters, chainrings and mech, so it's not necessarily just down to the new mech design, but that's what you want: all the groupset components working together well.

Brakes

Most of the changes to the brake callipers happened with the previous 105-5800 groupset: there was a change to a symmetrical dual-pivot design, support for direct mount frames and room for 28mm tyres. Those changes are all carried through; the only noticeable difference is that the quick release lever has been repositioned so that it tucks in to the arm when it's closed. It might be more aero, who knows; it's certainly a little bit neater.

The Shimano symmetrical dual-pivot brakes are, for me, the best road rim brakes out there. They have a very solid feel and modulation is excellent. I've been using the brakes on my race bike, which has Swiss Side Hadron 485 wheels that have an alloy brake track, and the brake performance from a rim brake is about as good as you're going to find for a rim brake. The 105 callipers are not noticeably inferior to the Ultegra brakes in anything other than weight, and even then we're only talking about 20g here and there.

Cassette

The main change to the 105 cassettes for the 7000 series groupset is that there are some wider range options available. 11-32 was the biggest you could go with the previous 105 groupset, but now there's an 11-34 option too. It's designed to also fit a mountain bike wheel, so you need the optional spacer if you're fitting it to an 11-speed road wheelset. The fact that the weights stated for the old and new cassettes are identical suggests that not much has changed otherwise. Not that it needed to: shifts are crisp right across the sprockets.

Chain

The 105 chain gets the same ultra-low friction SIL-TEC surface treatment as the more expensive chains and – praise be! – Shimano chains now come with a quick link, making them much easier to fit and remove. The quick link isn't maybe quite as easy to use as a KMC one but it's a whole lot better than the break-off pin they insisted on using up until now. The 105 chain is a whole 3g heavier than the Ultegra one, which I doubt you'll notice.

Pedals

Shimano's SPD-SL system is well-established, and the PD-R7000 pedal is an incremental development over the last incarnation. The new design of the carbon fibre reinforced resin pedal body has managed to shave a bit of weight, though; the weight is down 25g to 265g, only 17g more than the Ultegra pedals. There's a big range of tension available, so you can be securely or loosely held to your bike depending on your preference. The SPD-SL system is my personal favourite for road cycling, but different pedals suit different folks. The pedals come shipped with SM-SH-11 (yellow) cleats, which have 6° of float. There are two other options: blue, with 2° of float, and red, with no float at all.

The pedals have a nice low profile which means you can lean them over into the corners a long way; Shimano says they can cope with a 31° lean. Sealed axles and cartridge bearing should mean a long service interval. In use they're indistinguishable from the more expensive Ultegra pedals; weight is really the only difference here.

Weight

Overall, you're looking at a full system weight that's about 200g heavier than Ultegra 8000, and you can save yourself half a kilo by going all the way to Dura Ace at the top of the mechanical tree. Here's a chart of how the weights of the different components stack up.

Is it worth spending the (significant) extra money to get Ultegra over 105 these days? Not in my opinion, for the riding that I do. It's nice to have shiny things, of course, and I'd much rather you spent your disposable income on bike parts than pretty much anything else. But speaking as a third-cat racer with a limited budget, I'd say this is as good as it gets in terms of bangs per buck right now. In terms of functionality there is no compromise here: this groupset is better than Dura Ace was a few years ago, for a fraction of the price. There's no aspect of its performance that would be meaningfully improved by going one rung up the groupset ladder. You'd just about be able to tell the difference in a blind test if you went up to Dura Ace – and you'd save half a kilo, which isn't insignificant – but you'd be spending more than twice as much.

The weight savings aren't spread evenly. If you were looking at getting some Ultegra bits You'd be hard pressed to justify upgrading from a 105 chain, for example, to net the 3g weight saving that gives. The biggest saving in absolute terms is the Dual Control levers (62g) and the biggest in terms of percentage is the cassette (17% lighter). The second is interesting in that the cassette is often a place where bike manufacturers spec down as it's not an obvious downgrade.

The new 105 groupset is better than the outgoing 105-5800 system: the shifting is improved and it gets nearly all the innovations from the more expensive groupsets. But it remains the case that 105-5800 is a really excellent groupset too and the release of 105-7000 will mean there are bargains to be had out there. Currently, looking online suggests that the new 105 is about £150 more expensive right now than its predecessor. Is the new groupset £150 better than the previous one? It's a pretty marginal decision, unless you're looking for the extra capacity from the GS mech and wider range cassette. If you're buying a new bike with this groupset already fitted, though, then rest assured: it represents stellar value for the near-flawless performance you get. In terms of bangs per buck, this is as good as it gets.

Verdict

The best value performance groupset is better than ever