Hub/wheel compatibility for Sram XD-R 12 spd freehub.

  • Creator
    Topic
  • #31567
    robmerro

    Hi,

    Trying to source a budget wheelset that accepts a Fulcrum/Campagnolo freehub driver so i can run the Sram 12spd cassette.

    Anybody had these issues where the advice from shops only seem to issue the mid to higher end pricey wheelsets? 

Viewing 2 replies - 1 through 2 (of 2 total)
  • Author
    Replies
  • #979387
    0
    Recoveryride

    As stated above, you don’t

    As stated above, you don’t need new wheels – just a new freehub. That assumes there is an XDR freehub [SRAM 12sp] for your current wheelset, of course. All being well, should cost you £50 ish and it’s a 5 minute job.

    #979385
    0
    Nick in Bilbao

    May be I’m missing something,
    May be I’m missing something, but you need an XDR free hub to run SRAM 12 speed not a Fulcrum/Campagnolo one. I have a set from Reynolds and a set from DT Swiss both are good. You can change the free hub body very easily, it just pulls out. Hunt and DT have sets for ~£500

Viewing 2 replies - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.