front mech shift

This topic has 3 replies, 3 voices, and was last updated 12 years, 10 months ago by Shanefutcher.

Creator

Topic
August 14, 2013 at 10:41 pm #19613

Shanefutcher

Hi can anyone help?I’ve got problems shifting into the big ring on the gear,what is best way to fix
Creator

Topic

Viewing 3 replies - 1 through 3 (of 3 total)

Sort:

Author

Replies
August 15, 2013 at 4:40 pm #751999
0

Shanefutcher

Its problem number 1 so I’ll
Its problem number 1 so I’ll try fixing tonight.thanks for advice guys

August 15, 2013 at 10:59 am #751997
0

Bedfordshire Clanger

What kind of problem?
What kind of problem?

1.Won’t go far enough to get on the big ring?
2.Goes too far and shifts the chain off of the outside of the big ring?

1. Tighten the cable a quarter turn at a time until it works.

2. Adjust the outer limit screw so that the mech can’t move far enough to shift the chain off of the ring.

Or is it something else?

August 14, 2013 at 11:21 pm #751995
0

KiwiMike

Read the manual, set the
Read the manual, set the shifter up correctly. And/or Listen to one of the @bikeshopshow podcasts covering front mech setup. Ep45: http://bikeshopshow.libsyn.com/bike-shop-show-00045

You can’t go wrong.
Author

Replies

Viewing 3 replies - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.