preferred-google-button
log in
register

The sound of Flex ?

  • Creator
    Topic
  • February 16, 2013 at 1:21 pm #17992
    kupepe

    Hello,

    I have recently bought a new pair of wheels. For your information i am 1.92 m and weight 95 kgs. Twice the last month I heard a “squak” every time i pedalled off the saddle in order to climd a small hill fast. So after 3, 4 “squacks” i get back in the saddle to avoid any bad incident.

    Do you think that maybe i am too heavy for my wheels ? Is it the sound of flex ?

    Thanx in advance

  • Creator
    Topic
Viewing 8 replies - 1 through 8 (of 8 total)
  • Author
    Replies
  • February 18, 2013 at 5:49 pm #717395
    0
    SpeshRider7287

    No worries. As a mechanic I
    No worries. As a mechanic I come across this problem quite frequently..
    It’s usually restricted to new, carbon rimmed wheels but can happen on older wheels too as the spokes stretch/settle into place. Spoke freeze works really well but I’d make sure the shop uses a tension meter to get them spot on, then give them a good caning afterwards. If flex continues to be an issue, just go 1/4 turn tighter on each nipple and repeat the process until flex goes.
    Optimum tension can be anywhere between 100khf and up to 200khf (although for liability reasons, manufacturers won’t tell you this). If start at roughly 110khf and work from there in small increments until you’re happy with the feel. Let me know how you get on pal..

    George

    February 17, 2013 at 7:43 pm #717393
    0
    kupepe

    SpeshRider7287 wrote:You will

    SpeshRider7287 wrote:
    You will need to get the spokes tightened. Had exactly the same thing on some Zipp 404’s a while back and when I re-tensioned them the squeaking had disappeared completely. Also helps to use some DT Swiss spoke freeze.. No need to worry about being too heavy for them as they’ll take a lot more than 90kg without any issues. Hope this helps.

    Thanx for the info … sounds that you know what u talking about …. and the answers serves my psychology

    Will go to my LBS asap …

    February 17, 2013 at 4:02 pm #717391
    0
    bashthebox

    I’ve got RS80s – same rim and
    I’ve got RS80s – same rim and spokes as your wheels – and I get flex when out of the seat. I thought it was a bit of frame flex, because a mate’s got the dura ace wheels and they don’t flex for him. He’s heavier than me too.

    February 17, 2013 at 11:26 am #717389
    0
    SpeshRider7287

    You will need to get the
    You will need to get the spokes tightened. Had exactly the same thing on some Zipp 404’s a while back and when I re-tensioned them the squeaking had disappeared completely. Also helps to use some DT Swiss spoke freeze.. No need to worry about being too heavy for them as they’ll take a lot more than 90kg without any issues. Hope this helps.

    February 16, 2013 at 4:24 pm #717387
    0
    pirnie

    Hmm the wheels I had problems
    Hmm the wheels I had problems with were Shimano RS80s which are, as far as I’m aware, very similar wheels… 🙁

    February 16, 2013 at 3:15 pm #717385
    0
    kupepe

    jimmo62 wrote:At 95Kg it’s

    jimmo62 wrote:
    At 95Kg it’s unlikley you are too heavy unless they are really exotic – check the specs with the manufacturer to see what they say. It could be a variety of other things making a noise – can you try the wheels in another bike? Have you checked the quick release is really tight?

    May be worth a trip to the local bike shop

    They are Shimanoes DA C24

    February 16, 2013 at 3:04 pm #717383
    0
    pirnie

    I have had a similar problem
    I have had a similar problem before… I’m about your height and around 80kg. When I’m out of the saddle one of my sets of wheels flexes so that it was rubbing on the brake blocks. In the wet you can hear it but it happens all the time I think, and it’s resulted in some very fast rim wear. What wheels are they?

    The other thing that might be worth doing is checking the wheel bearings, make sure there’s no play that might be causing the wheel to wobble?

    February 16, 2013 at 1:52 pm #717381
    0
    jimmo62

    At 95Kg it’s unlikley you are
    At 95Kg it’s unlikley you are too heavy unless they are really exotic – check the specs with the manufacturer to see what they say. It could be a variety of other things making a noise – can you try the wheels in another bike? Have you checked the quick release is really tight?

    May be worth a trip to the local bike shop

  • Author
    Replies
Viewing 8 replies - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.