preferred-google-button
log in
register

Changing Campag Veloce Cassette

  • Creator
    Topic
  • January 19, 2013 at 6:07 pm #17716
    jockster

    Hi

    Could anyone give me a list of tools I will need to do this. I have a very limited (i.e. a multi-tool) tool kit at the moment and would like to put on a new cassette. Cheers, Simon

  • Creator
    Topic
Viewing 7 replies - 1 through 7 (of 7 total)
  • Author
    Replies
  • January 19, 2013 at 7:41 pm #712237
    0
    cidermart

    I would do on a new cassette
    I would do on a new cassette you could use the old chain to hold the cassette and save on a chain whip but if you are borrowing then the whip is better.

    January 19, 2013 at 7:38 pm #712235
    0
    cidermart

    It is the park tool BBT-5 12
    It is the park tool BBT-5 12 spline lockring tool or equivilent. Some grease as well.

    January 19, 2013 at 7:02 pm #712233
    0
    jockster

    Hi – thanks for all the help
    Hi – thanks for all the help – will I need a new chain?

    Cheers, Simon

    January 19, 2013 at 6:54 pm #712231
    0
    jimmo62

    Make sure you get a Campag
    Make sure you get a Campag pattern cassette tool not a Shimano one….

    January 19, 2013 at 6:44 pm #712229
    0
    daviej

    oh yeah and a chain whip
    oh yeah and a chain whip

    January 19, 2013 at 6:33 pm #712227
    0
    stuke

    daviej wrote:you’ll need a

    daviej wrote:
    you’ll need a cassette removal tool but that is about it.

    ……. and a chain whip. The chain whip stops the cassette spinning on the free wheel while you undo the lock ring with the splined cassette tool.

    check out Park Tools website for loads of maintenance advice and detailed instructions

    January 19, 2013 at 6:15 pm #712225
    0
    daviej

    you’ll need a cassette
    you’ll need a cassette removal tool but that is about it.

  • Author
    Replies
Viewing 7 replies - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.