How to adjust hubs on Verenti Kilmeston

Superstarspaniel · 2012-09-10T21:27:46+01:00

I have a "knocking" play in the rear wheel of my Verenti Kilmeston. It probably equals a millimetre or two of play at the rim. I have tried tightening what seem to be the cones, but it's not really making a difference. They are getting very stiff now to tighten further, and nervous about going to far and ruining something. They are the Verenti Me branded wheels, which are labelled as special editions from Pro-Lite, but no other details available. Has anyone tried to adjust the hubs on this bike?

This topic has 1 reply, 2 voices, and was last updated 13 years, 11 months ago by John_the_Monkey.

Creator

Topic
September 10, 2012 at 9:27 pm #16796

Superstarspaniel

I have a “knocking” play in the rear wheel of my Verenti Kilmeston. It probably equals a millimetre or two of play at the rim. I have tried tightening what seem to be the cones, but it’s not really making a difference. They are getting very stiff now to tighten further, and nervous about going to far and ruining something.

They are the Verenti Me branded wheels, which are labelled as special editions from Pro-Lite, but no other details available.

Has anyone tried to adjust the hubs on this bike?
Creator

Topic

Viewing 1 replies (of 1 total)

Sort:

Author

Replies
September 12, 2012 at 9:08 am #699933
0

John_the_Monkey

Assuming it’s this Pro Lite,
Assuming it’s this Pro Lite, their You Tube channel has some info;

http://www.youtube.com/user/ProLiteNews

If you can match your wheels to the tech info on their site, there might be some help there too;

http://issuu.com/prolite/docs/wheelset_spec_chart?mode=a_p
Author

Replies

Viewing 1 replies (of 1 total)

You must be logged in to reply to this topic.