WTD MAVIC 501 rear hub or similar

  • Creator
    Topic
  • #14271
    monkeys_paw

    Hi,
    I need a very good condition rear hub. It would replace my mavic 501 with a broken axle. So the same again would be great ( without broken axle obviously!! )

    If not campagnolo sr or chorus

    126mm spacing

    English screw hub

    32 or 36 hole.

    Cheers
    Olly

Viewing 5 replies - 1 through 5 (of 5 total)
  • Author
    Replies
  • #655349
    0
    madame_mercian

    Thanks!
    Thanks!

    #655347
    0
    monkeys_paw

    Hi Justine!
    Thanks for

    Hi Justine!

    Thanks for getting back to me.
    I have found a hub and had a loverly new rear wheel built.
    Thanks anyway!!!

    Cheers
    olly

    #655345
    0
    madame_mercian

    Hello Again,
    My 501 hubs are

    Hello Again,

    My 501 hubs are the ones with a gray band on the “shelf” of the left flange. There’s no engraving or plaque one them.

    The rear is English threaded, with a 126 axle. Both the front and rear are drilled for 36 spokes.

    If you’re interested, please write to me at

    justineisadream@hotmail.com.

    Thanks you,

    Justine in NY, USA, a.k.a. Madame Mercian

    #655343
    0
    mattsccm

    Is that the one with the
    Is that the one with the Mavic logo on a plaque sort of thing?
    Got 2, one with 28 holes rear, tother 232 rear.
    Gloucestershire.

    #655341
    0
    madame_mercian

    Hi Olly,
    I have a rear

    Hi Olly,

    I have a rear English-threaded Mavic 501 hub with 126mm axle spacing. It’s in great condition, having been used only briefly and then carefully de-laced. I also have the front hub to match it.

    If you’re interested, send me an e-mail address to which I can send you photos.

    Cheers,

    Justine in NY, USA

Viewing 5 replies - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.