- This topic has 10 replies, 4 voices, and was last updated 6 years, 7 months ago by
.
-
Topic
-
Whilst bleeding my hydraulics (replaced the rear caliper) I very carefully removed the tiny nameplate fixing screw with a magnet and carefully put it onto my metal work tray. I thought “I always lose these tiny screws so I’ll keep it on the magnet”, but as I put it down, the magnet flipped over and catapulted the screw somewhere!
So, I’ve got my brake working again and clipped the nameplate back on, but thought that I should be able to pick up another screw easily enough. After a bit of searching, I’ve found this: https://www.sjscycles.co.uk/gear-spares/shimano-str785-name-plate-fixing-screw-left-y07r98020/
Does anyone happen to know the fixing screw size so that I can get a similar one without buying the nameplate as well?
-
With 8 spares you can be slap dash with your hex keys too!
PP
There’s an even chance that I’ll forget where the spares are and lose them, only to find them several months later.
With 8 spares you can be slap
With 8 spares you can be slap dash with your hex keys too!
PP
- You must be logged in to reply to this topic.