preferred-google-button
log in
register

tiagra 4650 or fsa gossamer megaexo crankset

  • Creator
    Topic
  • October 4, 2019 at 8:59 am #30168
    serbanalexandru

    hi, i just changed my bike, bought a merida ride disc, not new but very good condition, i have some spare components from my old bike, they were almost new as i didnt plan to change it and replaced them in june, my question is, is it worth to put shimano tiagra 4650 crankset with tiagra bb over fsa gossamer? and shimano 105 5700 rear derraileur over tiagra 4700 rear derraileur? any experience with merida hubs in rainy days?

  • Creator
    Topic
Viewing 3 replies - 1 through 3 (of 3 total)
  • Author
    Replies
  • October 4, 2019 at 7:24 pm #950721
    0
    serbanalexandru

    thank you for answers
    thank you for answers

    October 4, 2019 at 7:17 pm #950719
    0
    Simon E

    Unless there’s something

    Unless there’s something wrong with the FSA or it’s wearing out then leave it on there for now.

    As for hubs, quality (and weatherproofing) varies greatly. If they are cup & cone bearings it’s worth regreasing at intervals but with cartridge bearings I’m told you just replace them when needed.

    October 4, 2019 at 5:03 pm #950717
    0
    Woldsman

    Although both are 10-speed

    Although both are 10-speed 570x and 470x kit is not interchangeable (aside from, say, chainsets and cassettes). Whether you fit these models of Shimano 105 or Tiagra rear mech is determined by the shifter. 470x uses a cable pull which is different from other 10-speed groupsets: you can’t mix and match these particular examples. 

    So if you have 470x shifter go with the 470x rear mech. Any other 10-speed shifter should be used with the 570x rear mech. 

  • Author
    Replies
Viewing 3 replies - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.