preferred-google-button
log in
register

converting a Campag 10 to Shimano 11

  • Creator
    Topic
  • January 18, 2019 at 2:34 pm #29288
    Dr Livingstone

    I’m changing from Campagnolo Veloce (10 speed) to Ultegra Di2 (11 speed) and would like to find out if anyone has done the free hub swap and what issues they had.  I run Campag Zonda wheels and know that the free hub can be swapped over but have no knowledge about the width of the rear cassette and for once Google isn’t helping.

     

    Cheers

  • Creator
    Topic
Viewing 4 replies - 1 through 4 (of 4 total)
  • Author
    Replies
  • January 19, 2019 at 10:54 am #934427
    0
    Nick T

    The spacing between cogs is

    The spacing between cogs is the same, but the ramp and pin profile is different. It’ll work, though not as smoothly as it can with proper setup, you may or may not notice

    January 18, 2019 at 7:32 pm #934425
    0
    jpj84

    You can just use a Campag 11
    You can just use a Campag 11 speed cassette, no need to change the freehub. Though Campag cassettes are pretty pricy – Miche make cheaper compatible ones, that have worked fine for me.

    January 18, 2019 at 5:41 pm #934423
    0
    Nick T

    The freehubs are the same

    The freehubs are the same width for Campag 9/10/11/12 and Shimano 11 speeds, you just need to remove the freehub as per the instructions linked to above. Here’s a video of someone removing the freehub from a Campagnolo hub 

    the part you need reference code FH-BO015X1

    I actually have one of these for sale if you are interested, brand new (bought some wheels and was sent the wrong version)

    January 18, 2019 at 4:23 pm #934421
    0
    srchar

    I’ve done the swap the other

    I’ve done the swap the other way round (Shimano to Campag). Easy job.  See https://www.campagnolo.com/media/files/035_71_Technical_manual_Campagnolo_OP004_Rev04_10_17_ENG.pdf

  • Author
    Replies
Viewing 4 replies - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.