preferred-google-button
log in
register

Fizik Cyrano R5 stem bolts

  • Creator
    Topic
  • November 8, 2018 at 9:42 pm #29117
    steelerswheels

    Hi.  I’ve been gifted a used Fizik Cyrano R5 stem which is missing all the bolts (on the faceplate and clamp).  I emailed Fizik a few days ago asking what size and length bolts I need, but thought I’d ask on here just in case I don’t get an answer.  Would be really grateful if someone who has this stem could provide measurements!  Cheers

  • Creator
    Topic
Viewing 8 replies - 1 through 8 (of 8 total)
  • Author
    Replies
  • November 22, 2018 at 10:08 pm #931067
    0
    Pilot Pete

    Canyon48 wrote:

    Canyon48 wrote:
    Just lucky that I literally had that stem arrive through the post the day I saw your thread XD

    I see what you did there…laugh

    November 20, 2018 at 8:59 pm #931065
    0
    Canyon48

    steelerswheels wrote:

    steelerswheels wrote:

    Wow Canyon48 – thank you so much for taking the time to measure the bolt in such detail.  You’ve definitely gone above and beyond the call of duty there! 🙂

    No worries Steelers! Just lucky that I literally had that stem arrive through the post the day I saw your thread XD

    November 10, 2018 at 8:10 pm #931063
    0
    StraelGuy

    Thanks to thread, I now have

    Thanks to thread, I now have a 1/4″ T25 socket in my toolkit – cheers!

    November 10, 2018 at 7:10 pm #931061
    0
    steelerswheels

    Wow Canyon48 – thank you so

    Wow Canyon48 – thank you so much for taking the time to measure the bolt in such detail.  You’ve definitely gone above and beyond the call of duty there! 🙂

    November 10, 2018 at 2:29 pm #931059
    0
    Canyon48

    I have this exact stem to

    I have this exact stem to build up my new CX bike…

    The bolt is a 25mm torx.

    The head diameter is 7.85mm (one would assume nominal 8mm).

    The shaft is partially threaded and the full shaft length is 14.8mm.

    The threaded length of the shaft is approx 9.8mm.

    The diameter of the thread is 4.85mm (nominal 5mm).

    The diameter of the non-threaded part of the shaft is 4.90mm (nominal 5mm).

    There is a spherical washer with a 7.95mm OD and 5.30mm ID (8 and 5 nominal, respectively).

    The spheric washer is 1.40mm thick and the chamfer is approx 45°.

    November 9, 2018 at 9:14 am #931057
    0
    AKH

    My R5 stem has the same bolts

    My R5 stem has the same bolts for both the steerer clamp and faceplate. They’re all T25 torx heads, that measure ~8mm  diameter externally. A bigger head wouldn’t sit flush.

     

    I have a PRO stem kicking about which uses 4mm allen heads for all the bolts. The heads are the same 8mm diameter as the ones on the Fizik stem, so I’m pretty sure they would swap over without any problems. Sorry I’m not going to dismantle my bike to measure the bolt length and thread pitch.

    November 9, 2018 at 8:30 am #931055
    0
    StraelGuy

    Stem bolts are M5 with a 4 mm

    Stem face plate bolts are M5 with a 4 mm allen head generally. M6 with a 5 mm head for the steerer clamp.

    November 9, 2018 at 2:01 am #931053
    0
    Redvee

    I would have fought a M4x25

    I would have fought a M4x25 socket head scres in stainless would be OK but the head of the bolt might be too big if it sits in a recess on the faceplate.

  • Author
    Replies
Viewing 8 replies - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.