preferred-google-button
log in
register

Supersix fork 1 1/8 2012 model

  • This topic has 3 replies, 2 voices, and was last updated 8 years ago by madcarew.
  • Creator
    Topic
  • June 16, 2018 at 9:35 am #28631
    Conway

    Hi all,

     

    hopefully someone one can help me. I snapped my front fork and finding it difficult track down a new part. Part number is kp043 but apparently uk suppliers don’t and can’t get it. 

    I’m hoping some of ou guys know someone with a second hand one. My frame is grand, it’s just the fork which got  damaged.

    steerer length is 27cm, it’s a 58 frame.

    cheers 

  • Creator
    Topic
Viewing 3 replies - 1 through 3 (of 3 total)
  • Author
    Replies
  • June 18, 2018 at 1:33 am #921759
    0
    madcarew

    All good. I broke my forks on

    All good. I broke my forks on my 2011 evo and replaced them in 2014 with a 2013 model fork. I checked the specs with Cannondale and for that model, at the time the new fork was exactly the same angles as the old fork, and they were absolutley fine. Steerer length is an issue I guess, I’m lucky I ride a slammed 52cm, so most steeres are going to have enough length. I’m pretty sure evo model forks will fit your supersix. The Geometry is the same I believe.

    June 17, 2018 at 9:19 pm #921757
    0
    Conway

    Yeah eBay one’s I’m not so

    Yeah eBay one’s I’m not so sure about. A lot of them are for evo model or have a short steerer. I think I will try again with cannodale warranty through the company I got the bike through

    thx anyway

    June 17, 2018 at 5:58 pm #921755
    0
    madcarew

    ebay shows a number of them

    ebay shows a number of them for sale. I suspect you can get them supplied from the States, though it may be more difficult to get theexact model for your year / colour etc

  • Author
    Replies
Viewing 3 replies - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.