preferred-google-button
log in
register

Peugeot Performance

  • Creator
    Topic
  • May 21, 2018 at 8:06 pm #28540
    Lemonie

    Am looking for a part for a Peugeot Performance c1998 which is a new acquisition for my husband.  It is the mounting sleeve for a campagnolo veloxe 8spd rear derailleur.  I don’t have both parts of the broken one I have but have found a picture on here of the same part .. shown below

    https://i.imgur.com/5aTd0L3.jpg

    Where would be a good place to look for this.  Am totally new to road bikes.  Am also looking for the decals for this model but have had no luck googling so any pointers on that would be great as well.

     

  • Creator
    Topic
Viewing 8 replies - 1 through 8 (of 8 total)
  • Author
    Replies
  • May 23, 2018 at 6:43 pm #919991
    0
    RR

    Retrobike have copies of a

    Retrobike have copies of a lot of the older Campagnolo parts catalogues which you can use to double check the parts.

    eBay is probably the best option. The older 9 speed rear derailleurs should also be compatible as they have the same ratio up till year 2000. You could either replace the whole derailleur or buy a cheap one to cannibalise for the part.

    It’s easy to identify the older 9 speed ones as they have the b-screw on the mounting sleeve, while the newer ones have it under the guide pulley on the hanger.

    May 23, 2018 at 9:18 am #919989
    0
    HowardR

    “Stupid” questions are

    “Stupid” questions are generally the most useful questions.

    On the basis of what I’ve read in forums you should be o.k mixing 8spd Campag’ components. It might be worth asking Hiarly Stone.

    May 23, 2018 at 8:44 am #919987
    0
    mikeymustard

    Agree with previous poster

    Agree with previous poster about a complete derailleur.

    Ebay is your friend here, any 8 speed Campag will work (if it’s a short cage that’s on there then either short or long cage will fit, the latter with a longer chain, but if its already sporting a long cage then best swap like for like), there’s a few on there, or if you just want to cannibalise the broken bit off it, any campag of mid to late 90s (and maybe a little earlier/later) should be close enough.

    Campag stuff,  not being as ubiquitous as Shimano commands a bit of a premium – this could turn out to be quite an expensive project for a bike that’s not quite old enough to be considered a classic (yet)!

    Check out this lot for advice, friendly and helpful

     

     

    May 22, 2018 at 9:14 pm #919985
    0
    Lemonie

    Am sorry to ask stupid

    Am sorry to ask stupid questions but as long as it’s an 8 spd derailleur can I put any campagnolo on or will it have to be the same Veloce I have on now?

    May 22, 2018 at 7:54 am #919983
    0
    HowardR

    As to the rear mech – It’ll

    As to the rear mech – It’ll probably be rather easier to track down a compleate item rather than the broken part (& possibly not much more expensive?)

    As a starting place you could try:

    http://www.hilarystone.com/gearscampagnolorear.html

     

    May 22, 2018 at 7:50 am #919981
    0
    HowardR

    Decals ~ May help V2:

    Decals ~ May help V2:

    https://www.bicyclestickers.co.uk/collections/peugeot/products/00383-peugeot

     

     

    May 22, 2018 at 7:44 am #919979
    0
    HowardR

    Declas – May help:

    Declas – May help:

    https://h-lloyd-cycles.myshopify.com/pages/search-results-page?q=peugeot

    May 21, 2018 at 9:21 pm #919977
    0
    Kapelmuur

    Try retrobike.co.uk

    Try retrobike.co.uk

  • Author
    Replies
Viewing 8 replies - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.