preferred-google-button
log in
register

Tarmac SL6 Bottom Bracket

  • Creator
    Topic
  • January 18, 2018 at 3:05 pm #28043
    Mbart78

    Can anyone advise what the sizes are of the bottom bracket on the new SL6 please?

    Its OSBB but I want to know what the shell width is and diameter.

    Basically looking to run a Shimano crankset and what adaptors I need.

    The delrin Wheels mfg option is the cheapest at the moment but if it creaks i need other options.

    Ceramicspeed do a full conversion kit which is similar to the Praxis options.

    Any comments greatly appreciated.

  • Creator
    Topic
Viewing 2 replies - 1 through 2 (of 2 total)
  • Author
    Replies
  • January 19, 2018 at 8:52 pm #910309
    0
    VeloUSA

    Specy badges the 2018 Tarmac

    Specy badges the 2018 Tarmac SL6 in one model only, S-Works. I’m curious to know if you are buying a new frame to build upon or a complete bike with plans to swap out the crankset? If the former, the frame comes with Ceramic Speed bearings. And Specy supplies from the factory BB30 24mm Shimano spindle cups, but not as an add-on aftermarket purchase. For the latter just Google OSBB Shimano adaptors as there are many choices on the mkt.

    January 19, 2018 at 8:10 am #910307
    0
    CXR94Di2

    If your bottom bracket frame
    If your bottom bracket frame is 68mm wide and has a 46mm internal diameter then Hope do a screw together bottom bracket with 24 mm bearings which are replaceable.

    I’ve just fitted one to my Boardman and its smooth and quiet.

  • Author
    Replies
Viewing 2 replies - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.