Carbon fork with mudguard eyelets

craig749 · 2017-09-18T08:08:52+01:00

Can anyone recommend a carbon fork (caliper brakes) with mudguard eyelets that will fit a 28m tyre? most of the ones i have looked at will only fit 25mm. I currently use a Kinesis DC07 but it needs replacing and I think I'd struggle to get a 28mm in there. Thanks :)

This topic has 4 replies, 5 voices, and was last updated 8 years, 9 months ago by moorsey72.

Creator

Topic
September 18, 2017 at 8:08 am #27652

craig749

Can anyone recommend a carbon fork (caliper brakes) with mudguard eyelets that will fit a 28m tyre? most of the ones i have looked at will only fit 25mm. I currently use a Kinesis DC07 but it needs replacing and I think I’d struggle to get a 28mm in there.

Thanks 🙂
Creator

Topic

Viewing 4 replies - 1 through 4 (of 4 total)

Sort:

Author

Replies
September 20, 2017 at 9:40 pm #902551
0

moorsey72

How about a columbus Hive?
How about a columbus Hive?
Got one specced on my rourkie audax build, not based on experience as build not ready till end of this month but seems to fit the bill for what youre after

September 18, 2017 at 3:38 pm #902549
0

flyingpitman

I Was looking for similar

I Was looking for similar forks as you,but after seeing price went for forks for 25mmtyres.

Probikekit had forks that would take 28 mm

https://www.probikekit.co.uk/cycling-forks/kinesis-gf-ti-carbon-fork/11240673.html?affil=thggpsad&switchcurrency=GBP&shippingcountry=GB&gclid=EAIaIQobChMI24vssIev1gIVQzwbCh1qKAEhEAkYASABEgLbnvD_BwE&gclsrc=aw.ds&dclid=CM_vn9WHr9YCFbaD7Qodbj8G2g out of stock now but you may be able to shop around.

I went for these ones.25mm tyres are fine for me,and forks are really good.

https://www.sjscycles.co.uk/forks/ambrosio-momentum-carbon-forks-700c-1-18-inch-ahead-deep-drop-with-mudguard-eyes/

September 18, 2017 at 9:40 am #902547
0

srchar

I get 28mm tyres with guards

I get 28mm tyres with guards in a Kinesis Tracer. Tapered steerer though.

September 18, 2017 at 8:43 am #902545
0

TypeVertigo

One variant of the Whisky No

One variant of the Whisky No.7 fork comes to mind. They say it will fit a 35 mm tire. It’s got a straight 1-1/8″ steerer, though – so you’ll need a corresponding headset bottom bearing if your Kinesis fork had a tapered steerer.

http://whiskyparts.co/forks/no7_rd_plus_qr_mid_reach_fork
Author

Replies

Viewing 4 replies - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.