preferred-google-button
log in
register

28mm tyres on Via Nirone 7

  • Creator
    Topic
  • August 4, 2017 at 2:31 pm #27450
    SeannyD

    hi

    I have one of the above, has anyone fitted 28mm tyres to one? Running 25mm and there appears to be enough room but i’m not sue if they will fit.

  • Creator
    Topic
Viewing 3 replies - 1 through 3 (of 3 total)
  • Author
    Replies
  • August 7, 2017 at 9:04 am #899021
    0
    Alessandro

    I’ve got a Via Nirone from

    I’ve got a Via Nirone from 2010 and I’m currently running a 28mm tyre on the rear with no issues. I’ll be replacing the front tyre with a 28mm as well when it eventually needs to be changed. 

    August 5, 2017 at 10:23 am #899019
    0
    charliem

    I was think about getting 28s

    I was think about getting 28s for mine (2014 model), the front looked like it would easily clear a 28 (I’ve got 25 durano+ on atm) but might be tight at the back, the 25 is pretty close to the front derailleur band (on an 18mm internal rim). 

    August 5, 2017 at 7:31 am #899017
    0
    Jack Osbourne snr

    I’m pretty sure I did at one

    I’m pretty sure I did at one point, but mine was a 2005 model. Things may have changed since then.

    You need to look at clearance between tyre and seat tube, chainstays and most importantly the gap between the tyre and the brake bridge/fork crown and caliper.

    You’ll probably get one on the front easily, but the back is the one that catches people… Often it’ll clear the bottom bracket area but the brake bridge will be too low.

  • Author
    Replies
Viewing 3 replies - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.