- This topic has 2 replies, 2 voices, and was last updated 8 years, 11 months ago by
.
-
Topic
-
Hello all,
Can anyone briefly advise on compatibility between an Ultegra Di2 6870 2×11 groupset and other components, such as the EW-RS910 ot the STI levers ST-9070 ?
Thanks in advance.
-
Exactly what I was looking
Exactly what I was looking for
Many thanks.
I can do better than briefly
I can do better than briefly advise
, I can give you the link which tells you what is compatable with what –http://e-tubeproject.shimano.com/pdf/en/HM-CC.3.0.0-01-EN.pdf
This is also quite useful –
http://carltonbale.com/shimano-di2-everything-you-need-to-know/comment-page-5/#comments
But to briefly advise, the Di2 parts are compatable with each other providing you don’t mix a FD from one range with a RD from another – they both have to be in the same range. So you can use a 6870 FD and 6870 RD with 9070 Levers (I actually run the reverse on one bike)
, I can give you the link which tells you what is compatable with what –- You must be logged in to reply to this topic.