- This topic has 3 replies, 3 voices, and was last updated 10 years, 3 months ago by .
-
Topic
-
All the Shimano 8 speed cassettes start with 11 tooth which is too high for me.
I’m looking to start with an 8 speed Alivio MTB cassette 11-32 and swap the first two cogs with a 13 and 14 from a 9 speed Sora road cassette. I know the cogs and spacers on 9 speeds are slightly different thickness to 8 speed but I can get round that by using the 8 speed spacers with shims. I might not even need shims since it is just the last two cogs. EG
Alivio CS-HG51-8:
11, 13,15,18,21,24,28,32
Sora CS-HG50-9:
13,14,15…
Is the 13 tooth Sora the same fit as the 11 tooth Alivio?
Could I swap the 14 tooth Sora for the 13 tooth Alivio?
Does an MTB freehub have the same splines as a road freehub?
End result would be 13,14,15,18,21,24,28,32
Viewing 3 replies - 1 through 3 (of 3 total)
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.