- This topic has 13 replies, 6 voices, and was last updated 11 years ago by .
-
Topic
-
Hi all. Just taken delivery of a new bike (Canyon Ultimate SLX, which is STUNNING) and was wondering about using a saddle bag with a carbon post. I have one of the small Toepeak clip-on bags, which clips into the saddle and then has a velcro strap at the front that goes round the post to hold it in place.
On my old bike with an alloy post, the area under the velcro strap has worn – mostly it just seems to be the black anodizing has worn off, exposing the raw alloy underneat, but there are also a few bits with slight pitting that you can feel if you run a finger over it. Is this something I should be concerned about with a carbon post, or should it be fine?
As an aside, the new bike has a Fizik saddle, so I did look at one of their bags that clip directly into the saddle and don’t have a front strap, but there are widespread reviews online saying that the bracket is too weak and snaps easily, so I think I’ll give that a miss…
- You must be logged in to reply to this topic.