preferred-google-button
log in
register

Brakes upgrade – is it worth it?

  • Creator
    Topic
  • April 7, 2015 at 2:33 pm #23679
    WorkingMan

    I have recently purchased my first road bike – a Felt Z100. The groupset is Shimano Claris but it comes with no-name brakes (presumably to save costs). I have seen a pair of Claris brake calipers for £30. My questions are: will I see a improvement if I upgrade? and is it a simple procedure to install the replacement calipers?

  • Creator
    Topic
Viewing 9 replies - 1 through 9 (of 9 total)
  • Author
    Replies
  • April 8, 2015 at 6:39 pm #840525
    0
    unistriker

    This probably explains what I
    This probably explains what I currently feel on my no name Callipers. I have upgraded the pads to Deda Big Blocks (dont know the correct name).

    The Wheels are true, and callipers set up as best i can but i still get a pulsing feeling when putting more pressure into the pads. Its not a consistent Deceleration its a jerky one.

    April 8, 2015 at 3:33 pm #840523
    0
    alotronic

    Yes! But go up to 105, even
    Yes! But go up to 105, even previous gen ones if money is tight (5600 series), and get aftermarket pads as well.

    April 8, 2015 at 2:11 pm #840521
    0
    bashthebox

    Oh yeah, shit brakes are
    Oh yeah, shit brakes are awful. It’s the flex you get in the calliper arms, so you get a situation where you have no brakes, no brakes, no brakes…. LOCK UP. I’ve got a terrible rear brake on my singlespeed commuter, not helped by having to be long reach. The flex in the thing is daft, like it’s made out of cheese.

    April 8, 2015 at 1:12 pm #840519
    0
    2 Wheeled Idiot

    ^you’ve clearly never ridden
    ^you’ve clearly never ridden poor brake calipers then, they can be scary sometimes ….just vaguely slow you instead of actually braking.

    April 8, 2015 at 12:39 pm #840517
    0
    OnTheRopes

    Flying Scot wrote:Try better

    Flying Scot wrote:
    Try better quality pads first.

    Yes, although I have recently upgraded the brake calipers to Dura Ace on my race bike I cant really see how the caliper itself can make braking performance that much better. I upgraded for weight and bling factor.
    Try decent brake blocks first and then cables unless you just fancy the upgrade then go for it.

    April 7, 2015 at 7:32 pm #840515
    0
    gmac101

    New brake pads and cables
    New brake pads and cables will make a big difference especially if you buy something better than came with the bike, you’ll also need new bar tape – maybe new brakes will be cheaper!

    April 7, 2015 at 7:07 pm #840513
    0
    Flying Scot

    Try better quality pads
    Try better quality pads first.

    April 7, 2015 at 6:26 pm #840511
    0
    unistriker

    I am currently in the same
    I am currently in the same position as you. I have no confidence in the brakes. I have taken the plunge and Paid for some Shimano 105s to replace the no name crap on my bike.

    There is a lot of talk of improved Power/modulation and feel. I really hope this is true.

    I hope the new ones are easier to adjust. The no name stuff doesnt stay where you tell it to.

    April 7, 2015 at 2:43 pm #840509
    0
    2 Wheeled Idiot

    If you can stop quickly in an
    If you can stop quickly in an emergency/lock the wheel and ride normally without straining your arms, I wouldn’t bother upgrading.
    If you do need to upgrade it is a very easy switch over requiring just Allen keys. Also If you cannot stop easily, it may be worth getting some decent brakeblocks with a softer compound, this will improve the brake power and feel.

  • Author
    Replies
Viewing 9 replies - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.