preferred-google-button
log in
register

Garmin 810 and Shimano Di2

  • Creator
    Topic
  • January 15, 2015 at 2:45 pm #23020
    Scrufftie

    Hi All

    If you’re 100% old school, look away now!

    Is anyone else out there using their Garmin 810 (or possibly 1000) in conjunction with Shimano Di2?

    I can display the gear I’m in and battery level but I can’t seem to operate the Garmin using the Dura-Ace lever-top buttons. Has anyone had any joy?

  • Creator
    Topic
Viewing 2 replies - 1 through 2 (of 2 total)
  • Author
    Replies
  • January 17, 2015 at 1:32 pm #827303
    0
    Scrufftie

    Thank, Watlina. I have tried
    Thank, Watlina. I have tried changing the selections for the buttons but I’ll try again as you’re not the first to mention that this could jolt the buttons into action.

    January 16, 2015 at 11:54 am #827301
    0
    watlina

    It looks like you’ve got the
    It looks like you’ve got the 3.40 Garmin Firmware on your 810 and the SM-EWW01 working as you’ve got the gear and battery data.

    Only the ST-9070 levers have the buttons but I guess you must have them as you mention Dura-Ace and the SM-EWW01 is only for E-tube which is 9070.

    Certainly for the 1000 some people have found you need to change the function of the buttons on the Garmin then change them back to ‘page change’ to get them to work.
    On the 1000 it’s. Go in to the sensors menu of the Garmin, select the Di2 Sensor, then Sensor Details, then Dura Ace Remote Setup.

    The buttons are configurable for 4 functions based on each button having a short or long press. With the avalible functions being :-

    Next Page
    Previous Page
    Record Lap
    Start and Stop Timer
    Start Timer
    Stop Timer
    Turn Backlight On
    Show Map
    Show Compass
    Show Elevation Profile
    Show Lap Summary
    Show Virtual Partner

    My levers are R785 so no buttons 🙁

  • Author
    Replies
Viewing 2 replies - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.