Single Speed Racing

  • Creator
    Topic
  • #22224
    Morgan700cc

    I rode the SkyRide in Leicester today on my single-speed roadie (not fixed) today, and was very pleasantly surprised at how quickly I got round the circuit. It was mainly flat, not that long, and set up for all types of riders, but I had a blast, and kept up a really good speed throughout, even though it wasn’t a race.

    My question is, are there single speed road/city races in the UK? I’ve done a quick search, but figure folks on here would know better… After today’s ‘warm-up’, I’d really like to have a go at some proper racing without gears, as I love the purity of single-speed. Any ideas?

Viewing 11 replies - 1 through 11 (of 11 total)
  • Author
    Replies
  • #811353
    0
    s_lim

    I commute mainly on the flat
    I commute mainly on the flat and manage fine on 48:16 (singlespeed). There are a few lumps in there, but nothing too long/steep. I’ve also done a few club runs on it, and it was grand over rolly terrain.

    I did our clubs’ town-centre crit race on it; average speed was 24mph, which was grand, but I couldn’t contest the sprint finish. If I was to do it again, I’d stick a 52 on the front.

    #811351
    0
    Morgan700cc

    Thanks folks. 44/16 it is
    Thanks folks. 44/16 it is then! (I have some big hills near me…)

    mtbtomo: I’m riding a 1982 French made Peugeot frame and fork which were single speeded and kindly donated to me by my lovely bike buddies a few years back. I have nice Weinmann wheels and Sora brakes on now, which make a huge difference. I hope to get the cogs sorted in the next few weeks… Birthday coming up! (Money is an issue, so upgrades take ages.)

    #811349
    0
    mzungu

    I have a pompino which I had
    I have a pompino which I had at 48:16 for ages . The hills hurt so I’ve changed to 44:16. Massively better on hills but spinny on the flats. That’s SS. I have a fixed 18 cog which I am going to have to try. 44:18 will be good on the hills I face. I’ll keep the back break on for the moment to save my knees.

    #811347
    0
    Binky

    I ride a 46:16 upgraded the
    I ride a 46:16 upgraded the front from 42 as i was tired of spinning out. It took a while to get used to the change (i thought my brakes were locked on) but now i am back to whipping along the road.

    If you look at the ‘goskyride.com’ website, you may be able to find some rides to suit you.

    What bike do you ride? I currently have the Genesis Day One SS.

    #811345
    0
    mtbtomo

    On a crit or a time trial
    On a crit or a time trial you’ll need something much bigger than 39/18. I run 44/17 over a 12 mile commute even that’s a bit “spinny” on the flat.

    You can obviously work out the speed you will generate at a particular rpm.

    I think Sheldon Brown’s website may even have a calculator.

    #811343
    0
    Morgan700cc

    39/18 at the mo, but I need a
    39/18 at the mo, but I need a new front ring and am planning on going a bit bigger. Good idea? Or stay on the same ratio?

    #811341
    0
    Simon E

    Some clubs run medium gear
    Some clubs run medium gear time trials – you can used gears up to 72″ but many like to run SS or fixed:
    http://www.fixedwheel.co.uk/tech.htm
    http://www.nottinghamclarion.co.uk/pages/mediumgearttseries.aspx

    Some hill climb courses are well suited to fixed/SS (though probably somewhat lower than 72″!).

    #811339
    0
    drfabulous0

    A lot of alleycats will allow
    A lot of alleycats will allow SS these days, some even gears, but most are still won by guys riding fixed.

    #811337
    0
    Gkam84

    You can do cycle speedway on
    You can do cycle speedway on a single speed, but I can’t think of any road races for SS only

    #811335
    0
    mzungu

    what gearing were you using?
    what gearing were you using?

    #811333
    0
    mtbtomo

    I’ve read that some people
    I’ve read that some people just race crits on singlespeed. Nothing to say you have to have gears

Viewing 11 replies - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.