preferred-google-button
log in
register

Croix de Fer fork specs

  • This topic has 7 replies, 4 voices, and was last updated 12 years ago by MKultra.
  • Creator
    Topic
  • August 17, 2014 at 4:31 pm #22176
    lluisb

    Hi,

    I need to know the size of an uncut steerer tube of a 2014 Croix de Fer frameset’s fork, and if it comes with a star nut fitted.

    Maybe somebody here knows it…

    Thanks!

  • Creator
    Topic
Viewing 7 replies - 1 through 7 (of 7 total)
  • Author
    Replies
  • August 20, 2014 at 2:49 pm #810329
    0
    MKultra

    You asked for specs.
    There
    You asked for specs.

    There are tons of cross forks out there.

    August 20, 2014 at 11:43 am #810327
    0
    Niall

    I’ve already contacted
    I’ve already contacted Genesis, but was told they don’t sell the Croix de Fer fork separately (don’t really want to pay £375 for the whole frameset).
    Looks like the 2015 model will have after-market fork upgrades.. I’ll perhaps go down that route.

    August 20, 2014 at 10:55 am #810325
    0
    MKultra

    Oh
    Oh look.

    http://www.genesisbikes.co.uk/bikes/frames/adventure/croix-de-fer-931

    August 20, 2014 at 10:51 am #810323
    0
    MKultra

    Genesis (also known as
    Genesis (also known as Madison UK) sell bare frames and forks if you look at the current web page for them, I would hit them up for the info.

    August 19, 2014 at 9:46 pm #810321
    0
    lluisb

    Thanks, now I know what to
    Thanks, now I know what to expect. I’m just making research but don’t know where you can get a new separate fork. I’m planning to buy a frameset (cross or similar, not a race one).

    I’ve read somewhere (maybe a forum) that a folk asked Genesis if they have a spare fork and they sent him an aluminum one (I guess not for free, sure). Maybe you can ask them directly.

    Thanks again!

    August 19, 2014 at 4:32 pm #810319
    0
    jacknorell

    Don’t know about the steerer
    Don’t know about the steerer length, but it won’t have a star nut installed as that entirely depends on the final cut length. Star nuts are usually supplied with the headset.

    August 19, 2014 at 3:38 pm #810317
    0
    Niall

    Can’t answer your question,
    Can’t answer your question, but would be interested to know where you plan to get one from? I’ve bent mine, and can’t find a spare anywhere.

  • Author
    Replies
Viewing 7 replies - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.