preferred-google-button
log in
register

What BB to get?

  • Creator
    Topic
  • February 11, 2012 at 8:26 pm #15067
    giladj

    Ok. so I have this old Binachi Reparto Corse L Lite Alloy
    Currently running with a 105 crank 53/42
    After some consideration I’ve decided to get this crank: Shimano Sora Compact Chainset 3450

    Thing is I just realized that I will probably need to replace the Bottom Bracket as the old 105 crank (probably) uses a square taper and the Sora needs only the bottom bracket cups
    Questions:
    Am I correct in assuming that I need to change the bottom bracket?
    If so, what BB should I get, how do I know what thread (english, italian) do I need?

  • Creator
    Topic
Viewing 6 replies - 1 through 6 (of 6 total)
  • Author
    Replies
  • February 13, 2012 at 11:12 am #664933
    0
    joeegg

    Just as an extra i use a Hope
    Just as an extra i use a Hope stainless bottom bracket on my mountain bike and its been excellent.Shimanos are cheaper but if you do wear out the bearings in HT2 bottom brackets you can replace the bearings without having to buy complete new units.RaceFace bearings used to be made of putty and lasted a couple of months.

    February 13, 2012 at 11:01 am #664931
    0
    joeegg

    There has to be threads in
    There has to be threads in the bottom bracket for a square taper or octalink shaft.
    Usually Shimano chainsets come with the bottom bracket cups if you’re buying hollowtech 2.Not many chainsets on the market now that are square taper,which i think is a shame because i find they last a lot longer than the outboard bearings.
    You’ll need the splined tool to remove the old square taper bottom bracket and as dave said drive side clockwise to remove if English.You’ll also need a screw in puller to draw off the crank arms first.
    The Hollowtech 2 is dead easy to fit but another tool is needed to finally tighten in the bearing cups.
    If you don’t fancy buying the tools its an easy and usually quick job at a bike shop as long as the old bottom bracket isn’t seized in.

    February 13, 2012 at 10:15 am #664929
    0
    charliemac74

    the_mikey wrote:It seems to

    the_mikey wrote:
    It seems to me the original poster doesn’t have threads for BB cups on his bike, so that being the case, what kind of BB will they need?

    What makes you say that?

    February 12, 2012 at 11:57 pm #664927
    0
    the_mikey

    It seems to me the original
    It seems to me the original poster doesn’t have threads for BB cups on his bike, so that being the case, what kind of BB will they need?

    February 11, 2012 at 8:55 pm #664925
    0
    chrisc

    My via Nirone is English
    My via Nirone is English thread.

    February 11, 2012 at 8:33 pm #664923
    0
    dave atkinson

    Yes you’ll need a Hollowtech
    Yes you’ll need a Hollowtech II compatible bottom bracket

    If your drive-side thread on the bottom bracket is reversed (ie clockwise to remove) then it’s english, if they’re standard threads on both sides it’s italian. i don’t know which your frame will be i’m afraid.

  • Author
    Replies
Viewing 6 replies - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.