Switching Canyon integrated stem and bars

  • This topic has 24 replies, 7 voices, and was last updated 8 years ago by Canyon48.
  • Creator
    Topic
  • #27975
    Canyon48

    Hi all,

    I purchased my Canyon Ultimate CF SLX last year and I didn’t realise that it was possible to swap the integrated bar and stem for a different size.

    I assume there is a time limit (which, I assume I’m well past now) to swap the bars with Canyon.

    Anyone know?

    Cheers 🙂

Viewing 9 replies - 16 through 24 (of 24 total)
  • Author
    Replies
  • #908909
    0
    Canyon48
    part_robot wrote:
    You’re aware that for each bar width for the aerocockpit there’s only one stem length (despite what the site might make you think, it is only one)? If you want narrow with a long stem (which is what I wanted) it’s not going to happen. I wanted 38cm wide which gives somehting like 80mm stem iirc.

    The H36 I have also has a 390 width with 100mm stem option https://www.canyon.com/en-gb/accessories/?category=3204#id=61696

    Unless the website is incorrect?

    #908907
    0
    part_robot

    You’re aware that for each

    You’re aware that for each bar width for the aerocockpit there’s only one stem length (despite what the site might make you think, it is only one)? If you want narrow with a long stem (which is what I wanted) it’s not going to happen. I wanted 38cm wide which gives somehting like 80mm stem iirc.

    #908905
    0
    Canyon48
    part_robot wrote:
    I sold mine on eBay for a small fortune; they easily go for £300 or more which is more than Canyon sell them for (did a fixed price auction).

    Be warned; there’s a bunch fiddly things you need when replacing them with normal bars. For one, the steerer is 1-1/4″ not 1-1/8 which limits your stem choice to basically Canyon and Giant. So… here’s what you ought to order from Canyon:

    – A Canyon stem or two (“ST Body V13-15 100 31,8 1 1/4 6 bk/gy” for 100mm). Definitely order a couple as not all bars have the same reach and they can take a fair while to deliver (although mine took less than a week)

    – Stem frontplate (“ST PC frontplate for V13/V15 bk”)

    – 4x Frontplate screws and conical washers (“ST CAYN screw M5 for V13/V14/V15”, “ST CAYN washer V13,V14,V15 inner D. 5mm”)

    – The top cap (“HSP ACRS top cover 1 1/4 bk”)

    – The top cover (“HSP ACRS top cover 1 1/4 bk”)

    –  A bunch of spacers of different sizes (“SPAC CAYN E246-15 1 1/4 2,5 bk” for 2.5mm one. I’d get 1×2.5mm, 1x5mm, 3x10mm… that should be more than enough for max or slammed)

    Canyon are super helpful so do ask them if you’re uncertain.

     

    Thanks robot, I’ll be selling mine on eBay, like you, I’ll be doing fixed price £300.

    I’m replacing it straight up with the same H36 aerocockpit from Canyon just with narrower bars!

    #908903
    0
    part_robot

    I sold mine on eBay for a

    I sold mine on eBay for a small fortune; they easily go for £300 or more which is more than Canyon sell them for (did a fixed price auction).

    Be warned; there’s a bunch fiddly things you need when replacing them with normal bars. For one, the steerer is 1-1/4″ not 1-1/8 which limits your stem choice to basically Canyon and Giant. So… here’s what you ought to order from Canyon:

    – A Canyon stem or two (“ST Body V13-15 100 31,8 1 1/4 6 bk/gy” for 100mm). Definitely order a couple as not all bars have the same reach and they can take a fair while to deliver (although mine took less than a week)

    – Stem frontplate (“ST PC frontplate for V13/V15 bk”)

    – 4x Frontplate screws and conical washers (“ST CAYN screw M5 for V13/V14/V15”, “ST CAYN washer V13,V14,V15 inner D. 5mm”)

    – The top cap (“HSP ACRS top cover 1 1/4 bk”)

    – The top cover (“HSP ACRS top cover 1 1/4 bk”)

    –  A bunch of spacers of different sizes (“SPAC CAYN E246-15 1 1/4 2,5 bk” for 2.5mm one. I’d get 1×2.5mm, 1x5mm, 3x10mm… that should be more than enough for max or slammed)

    Canyon are super helpful so do ask them if you’re uncertain.

     

    #908901
    0
    Canyon48
    deano802 wrote:
    wellsprop wrote:
    deano802 wrote:
    From speaking to them last week before my order they offer 30 days exchange like for like in whatever size you need.

    Yeah, I just spoke to them on live chat and it’s only for the first 30 days. Wish I’d known when I bought the bike 🙁

    They keep it very quiet, I think I will need to change the cockpit to 100/41 from the 90/39. Ideally I would want the one from the endurace which is wider as I am very broad.

    Yeah, it is annoying that they don’t make it clear…

    I’m sort of doing the opposite, want narrow bars but with the longer stem!

    #908899
    0
    deano802
    wellsprop wrote:
    deano802 wrote:
    From speaking to them last week before my order they offer 30 days exchange like for like in whatever size you need.

    Yeah, I just spoke to them on live chat and it’s only for the first 30 days. Wish I’d known when I bought the bike 🙁

    They keep it very quiet, I think I will need to change the cockpit to 100/41 from the 90/39. Ideally I would want the one from the endurace which is wider as I am very broad.

    #908897
    0
    Canyon48

    So does anyone want a Canyon

    So does anyone want a Canyon H36 aerocockpit with a 100mm stem and 410mm bar width for £250? haha…

    #908895
    0
    Canyon48
    deano802 wrote:
    From speaking to them last week before my order they offer 30 days exchange like for like in whatever size you need.

    Yeah, I just spoke to them on live chat and it’s only for the first 30 days. Wish I’d known when I bought the bike 🙁

    #908893
    0
    deano802

    From speaking to them last

    From speaking to them last week before my order they offer 30 days exchange like for like in whatever size you need.

Viewing 9 replies - 16 through 24 (of 24 total)
  • You must be logged in to reply to this topic.