spacer for 11 speed freehub with 10 spd ultegra cassette

brokenorange · 2014-03-23T00:30:31+00:00

To the collective knowledge base. I've just bought some fulcrum racing3 2 way fit wheels. It has an 11 spd freehub and I have an 10spd 11-28 ultegra cassette going in to it. There was a spacer provided with the wheels and I also have a (much thinner) spacer which came with cassette. Should I use both of these or just the one that came with the wheels? Any input would be greatly appreciated.

This topic has 17 replies, 13 voices, and was last updated 10 years, 5 months ago by Batchy.

Creator

Topic
March 23, 2014 at 12:30 am #21006

brokenorange

To the collective knowledge base.

I’ve just bought some fulcrum racing3 2 way fit wheels. It has an 11 spd freehub and I have an 10spd 11-28 ultegra cassette going in to it. There was a spacer provided with the wheels and I also have a (much thinner) spacer which came with cassette. Should I use both of these or just the one that came with the wheels?

Any input would be greatly appreciated.
Creator

Topic

Viewing 2 replies - 16 through 17 (of 17 total)

← 1 2

Sort:

Author

Replies
March 23, 2014 at 7:35 am #782329
0

therevokid

from what I’ve seen/read
from what I’ve seen/read you’ll need both spacers to fit a 10 speed cassette
on an 11speed hub !

March 23, 2014 at 2:04 am #782327
0

mrkeith119

Not actually sure, but try
Not actually sure, but try it with the one that came with the wheel only, if there is no side to side movement of the cassette, it should be fine. If there is movement take it off and add the other spacer.

If you do use this method and only use one spacer, check it after a couple of rides incase there is play when it settles down.
Author

Replies

Viewing 2 replies - 16 through 17 (of 17 total)

← 1 2

You must be logged in to reply to this topic.