Tubeless ready tyres on standard clincher rims?

  • Creator
    Topic
  • #31160
    lancsman20

    Is it fine to run tubeless ready tyres on clincher wheels (Mavic Aksiums). I’ve been given some Tubeless ready Conti tyres but only have normal clincher wheels, can I just run these as normal with an innertube?

Viewing 4 replies - 1 through 4 (of 4 total)
  • Author
    Replies
  • #971035
    0
    ktache

    Lots of talcum powder will

    Lots of talcum powder will make everything a bit slippery and helps get the bead on and get in place.

    Also meant to lower rolling resistance.

    It doesn’t hurt it at least…

    #971033
    0
    mtbtomo

    You might want to run a
    You might want to run a little lower pressure than normal as the tubeless variant will probably have a thicker and less supple side wall….

    #971031
    0
    mtbtomo

    Yes. Depends on your rims if
    Yes. Depends on your rims if they’re a tight fit or not. Getting Conti’s onto some Reynolds rims was the hardest tyre I’ve ever fitted to a wheel. But the same tyre on a different brand of alloy wheel and they went on with just a pair of thumbs. And inflated tubeless straight away.

    #971029
    0
    Nat Jas Moe

    Yes, but you will find them a

    Yes, but you will find them a tight fit, which may cause issues getting the tyre on without pinching the tube. I run tubless and when I have had in not sealing puncture and have had to resort to an innertube it has sometimes been a struggle to say the least. Can’t comment on the Conti tyres.

Viewing 4 replies - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.