[declantaylor50]

I’ve received my new bike in the post and it was not built so I decided to build it myself. Upon assembling it I got to the front wheel. Their was plastic shielding on the disc break that you had to screw off, i snapped it off and now there’s a piece of plastic left inside the axle of the front wheel. On the other end of the axle i screwed the shield off, but not the opposite end. It must be removed as a pin goes through the axle. Anyone any ideas how to remove this? Pictures attached below

Topic

[Nat Jas Moe]

Have you tried tapping it out

Have you tried tapping it out with an old quick release squewer. If its placeic this shouldn’t damage anything axel wise.

[Author]

Replies