- This topic has 0 replies, 1 voice, and was last updated 5 years, 7 months ago by
.
-
Topic
-
I am 171.5-172cm in height (bare foot) and 77.5-78cm inseam.
I bought the Canyon Endurace CFSL 8.0 di2 size S on the recommendation from my previous bike fitter who advised my previous Cannondale CX frame was a good match for the previous bike geometry/measurements.
I also checked the measurements of the size S on Spoke99 in comparison to my Cannondale which showed the size S was a much better/similar match than XS.
I have been on a couple of rides since I had the Endurace setup on Friday and my lower back is feeling quite uncomfortable during the rides.
I have checked Canyon’s website and based on my measurement’s they recommend a size XS however if I change my height from 172 (same inseam of 78) to 173, it recommends a size S.
I have made the same measurement’s as my previous bike for my saddle height and reach.
Any one know what could be causing the discomfort?Previous bike measurements attached.
https://i.ibb.co/bb6RKmC/125760288-10158686650956308-7569750357408753092-o.jpg
- You must be logged in to reply to this topic.