Single sped chain life

  • Creator
    Topic
  • #14213
    wigdog

    I have a Charge Mixer 8, it has an eccentric bottom bracket which is now at the extreme front of it’s adjustment and the chain is limp. If I turn the eccentric all the way to the back and remove a link the chain is too short to be joined back together.
    Am I just being tight and should just get a new chain or am I missing something about the available adjustment?
    I have done about 3800 miles on this chain.

    Any thoughts appreciated. :/

Viewing 4 replies - 1 through 4 (of 4 total)
  • Author
    Replies
  • #654643
    0
    Coodsta

    time for a new one me thinks,
    time for a new one me thinks, I can recommend KMC chains, I got a bog standard £7 job from my LBS & it’s been ace so far, plus replacing it doesn’t hurt too much…

    #654641
    0
    wigdog

    Okay, new chain it is – got
    Okay, new chain it is – got my eye on a nice red number to ‘complement’ the black frame!

    Cheers 🙂

    #654639
    0
    giff77

    Get yourself a new chain!!
    Get yourself a new chain!! Especially if you are doing that kind of mileage.

    #654637
    0
    Gkam84

    Well 3800 miles on a chain is
    Well 3800 miles on a chain is quite a bit, i’d just fork out and get a new one if your using your bike alot

Viewing 4 replies - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.