[LastBoyScout]

Hi,

Any recommendations for a handlebar mount for a camera? Must be the 1/4×20 screw mount, rather than the GoPro standard.

I’ve got a K-Edge Go Big Pro mount on one of my bikes, as per the link, and that works really well (although the screw could do with being a bit longer), but it’s a bit pricy for what it is, so wondered what else people use.

https://www.tredz.co.uk/.K-Edge-Go-Big-Pro-1-4-20-Handlebar-Mount_110776.htm

I don’t currently use a GPS (well, not on the bars, anyway), so I don’t need a dual purpose mount.

Thanks,

Topic

[jacknorell]

The K-edge stuff really is
The K-edge stuff really is all the quality option there is

[LastBoyScout]

OnYerBike wrote:

You could buy a GoPro-to-1/4 adapter, which would then open up the world of GoPro mounts.

E.g. https://www.amazon.co.uk/Goliton%C2%AE-GoPro-Tripod-Thread-Adapter/dp/B017YHIWZ6

It did actually come with a similar GoPro mount adapter, but the screw it came with is so pathetically short I’d need to buy another one, anyway!

Besides which, it’s another link in the system that I don’t really want, tbh.

[alansmurphy]

 

 

 

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F202065592083

[CygnusX1]

I doubt there are many other

I doubt there are many other alternatives out there given the ubiquity of the Go-Pro mount system now. The only other option would be a gopro handlebar mount coupled with a 1/4″ tripod screw adapter like this…

https://www.amazon.co.uk/Goliton%C2%AE-GoPro-Tripod-Thread-Adapter/dp/B017YHIWZ6 

…but that introduces a pivot point and additional height.

[OnYerBike]

You could buy a GoPro-to-1/4

You could buy a GoPro-to-1/4 adapter, which would then open up the world of GoPro mounts.

 

E.g. https://www.amazon.co.uk/Goliton%C2%AE-GoPro-Tripod-Thread-Adapter/dp/B017YHIWZ6

[LastBoyScout]

Thanks, but both of those are

Thanks, but both of those are above-bar mounts and I’m after an in-front-of-bars mount – basically, a cheaper alternative to the K-Edge one in my OP.

[CygnusX1]

The Minoura quick release

The Minoura quick release camera mount is a rock solid piece engineering but you pay for it. Big cork platform that happily supports an SLR body.  Comes in S (22-29mm), M (28-36mm) and presumably L (?) sizes.

http://www.ebay.co.uk/itm/MINOURA-VC100-M-camera-mount-Le-code-M-size-28-35mm-correspondence/201819092312?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20140107094819%26meid%3D50ea8a1091d847e29b9279d5a528f276%26pid%3D100039%26rk%3D1%26rkt%3D4%26sd%3D201819092312%26itm%3D201819092312&_trksid=p2054436.c100039.m2059

 

[Welsh boy]

I’ve used one of there, not

I’ve used one of there, not pretty but cheap https://www.ebay.co.uk/itm/Handlebar-For-GoPro-Hero-1-2-3-3-4-Camera-Seatpost-Clamp-Roll-Bar-Mount-Adapter/162773988793?epid=582791157&hash=item25e615f5b9:g:xpUAAOSwP4FaGZdH

 

 

[Author]

Replies