[propagandazoo]

Here is the freehub I need to removed.

It needs a two pin removal tool. See hub here:

https://drive.google.com/file/d/1_5ercXZSGRzdGcIqeklJyGz3rDW1qd8J/view?usp=drivesdk

I tried to use a modified 21 socket but the hub is too tight and the socket just burred…

Is there an actual tool I can buy?

Topic

[HoarseMann]

No probs. You might need both

No probs. You might need both! Some freehubs are removed from the opposite side as per this example: https://youtu.be/dfZ8BZLrfT4?t=406

There’s a lot of variation and can be a right pain to work out which one you have. I needed a 14mm key for one of my wheels!

[propagandazoo]

Thanks for info and speedy
Thanks for info and speedy reply.

Looks like I just need an 11 or 12mm Allen key.

Regards

[HoarseMann]

hmm, not sure about this

hmm, not sure about this particular wheel, but usually the freehub body can be fully removed with a large allen key.

That 2-slot lock ring is for disassembling the freehub body, which is inadviseable, as some have lots of tiny ball bearings inside and it’s a whole load easier just to buy a new freehub body. It also usually has a reverse thread like a left pedal (clockwise to slacken).

good video on it here: https://youtu.be/W3O_1P8EMiE?t=34

here’s the tool (check dimensions) https://www.amazon.co.uk/CYBTM-Disassembly-Installation-Flywheel-Cassette/dp/B08S386GVX/

[Author]

Replies