[SnowdoniaClimber]

I have a set of Duraace Carbon 1380 10spd wheels, and a new bike on the way which has 11spd Ultegra 6800. I really like these wheels and would preferably have them on the new bike for the summer. Is there a way to convert the 10spd wheels to 11spd to take the 11spd cassette? 

Topic

[turnerjohn]

Apparently you can remove the

Apparently you can remove the 16 tooth cog, put the spacer from this at the back of the cassette and it will fit and work fine , just have to check your limit screws . Could always re-hub the wheel with a new hub

[SnowdoniaClimber]

allanj wrote:

This says it’ll do the trick, no idea if there are any set up issues though:  http://www.edco-wheels.co.uk/product/monoblock-cassettes/

 

Thanks for that allanj, looks to be a good solution. I’m going to look if there are any cheaper options first though, will keep it in mind though. Thanks.

[allanj]

This says it’ll do the trick,

This says it’ll do the trick, no idea if there are any set up issues though:  http://www.edco-wheels.co.uk/product/monoblock-cassettes/

[Author]

Replies